About This Manual
© National Instruments Corporation xiii Lab-NB User Manual
• Your DAQ hardware user manuals—These manuals have detailed information about the
DAQ hardware that plugs into or is connected to your computer. Use these manuals for
hardware installation and configuration instructions, specification information about your
DAQ hardware, and application hints.
• Software manuals—Examples of software manuals you may have are the LabVIEW and
LabWindows®/CVI manual sets and the NI-DAQ manuals (a 4.6.1 or earlier version of
NI-DAQ supports LabWindows for DOS). After you set up your hardware system, use either
the application software (LabVIEW or LabWindows/CVI) manuals or the NI-DAQ manuals
to help you write your application. If you have a large and complicated system, it is
worthwhile to look through the software manuals before you configure your hardware.
• Accessory installation guides or manuals—If you are using accessory products, read the
terminal block and cable assembly installation guides or accessory board user manuals. They
explain how to physically connect the relevant pieces of the system. Consult these guides
when you are making your connections.
• SCXI chassis manuals—If you are using SCXI, read these manuals for maintenance
information on the chassis and installation instructions.
Related Documentation
The following documents contain information that you may find helpful as you read this manual.
• Macintosh II or Quadra Owner’s Manual, Getting Started manual, or Setting Up manual
•Inside Macintosh–Volume 5
Customer Communication
National Instruments wants to receive your comments on our products and manuals. We are
interested in the applications you develop with our products, and we want to help if you have
problems with them. To make it easy for you to contact us, this manual contains comment and
configuration forms for you to complete. These forms are in Appendix E, Customer
Communication, at the end of this manual.