National Instruments 374318A-01 Waveform Sample and Signal State Operations

Chapter 2 Measurement Studio Measurement Computing Edition .NET Class Libraries
© National Instruments Corporation 2-27 Measurement Studio for MCC User Manual
With the digital waveform graph control and the classes that interface with
the control, you can perform the following operations:
Plot Operations
• Plot digital waveform data, including digital signal state data and
timing information.
• Configure plot labels on the y-axis.
• Configure plot templates to customize plots that are implicitly created
from plotted data.
• Specify anti-aliased digital plots.
• Expand and collapse signal plots interactively.
Waveform Sample and Signal State Operations
• Simultaneously display waveforms and signals or display signals only.
• Create custom waveform sample and signal state styles.
• Configure waveform sample and signal state labels.
• Create custom waveform sample and signal state labels.
Axis Operations
• Configure the axis modes to fixed, exact autoscaling, or loose
autoscaling.
• Interactively change the range of an axis and invert the axis at run time
by clicking on the axis end labels.
Additional Operations
• Display data in sample or time mode.
• Configure the style and mode of scroll bars.
• Create custom scroll bars.
• Zoom interactively.
• Specify the image format of the control as BMP, GIF, JPEG, or PNG.
• Configure major, minor, and custom divisions.
Tip For more information about using the digital waveform graph control, refer to the
Using the Measurement Studio Web Forms Digital Waveform Graph .NET Control section
in the NI Measurement Studio Help.