FP-PS-4Operating Instructions 4 ni.com
Mounting YourFP-PS-4 on a Panel
Followthese steps to install the optional FieldPoint network panel
mountaccessory and mount the FP-PS-4 power supply module to
apanel. You can order the panel mount accessory, part number
777609-01,from National Instruments.
1. Usea flat-bladed screwdriver to unlock the rail clip, as shown
inFigure 1.
2. Attachthe panel mount accessory to the module, as shown in
Figure4.
Figure4. InstallingthePanel Mount Accessory
3. Lockthe panel mount accessory into place by pushing the rail
clipto the locked position.