©NationalInstruments Corp. 9 FP-PS-4Operating Instructions
Overloadprotection .......................... Protected against short
circuitsand output overload
Physical
Indicator............................................ Green DC POWER LED
Weight...............................................300 g (10.5 oz)
Environmental
FieldPointmodules are intended for indoor use only.
Operatingtemperature
15W operation ........................... 0 to 50 °C
10W operation ........................... 50 to 60 °C
Storagetempe rature .......................... –40 to +85 °C
Humidity........................................... 10 to 90% RH,
noncondensing
Maximumaltitude ............................. 2,000 m
Pollutiondegree ......... ....................... 2
Safety
Donot operate FieldPoint products in an explosive atmosphere or
wherethere may be flammable gases or fumes. If you need to
operateFieldPoint products in such an environment, the FieldPoint
productsmust be in a suitably rated enclosure. The FP-PS-4 meets
therequirements of the following standards for safety and
electricalequipment for measurement, control, and laboratory use:
•EN61010-1:1993/A2:1995, IEC 61010-1:1990/A2:1995
•UL3121-1:1998
•CAN/CSAC22.2 no. 1010.1:1992/A2:1997
Electromagnetic Compatibility
CE,C-Tick and FCC Part 15 (Class A) Compliant
Electricalemissions .......................... EN 55011 Class A at 10 m
FCCPart 15A above 1 GHz
Electricalimmunity .......................... Evaluated to EN 61326:
1997/A1:1998, Table 1
Note Forfull EMC compliance, you must operate this
devicewith shielded cabling. See the Declaration of
Conformity(DoC) for this product for anyadditional