Chapter2 Installation
©NationalInstruments Corporation 2-3 GPIB-SCSI-Afor Solaris
Thedefault settings of switches 1 through 3 are ON, OFF, ON, respectively,
toselect the SCSI ID of 5. Switches 4 through 8 are OFF, indicating that the
GPIB primary address of the GPIB-SCSI-A is 0.
Tables2-1 and 2-2 show the possible configurations of the eight switches
forSW1 and what each configuration indicates. Factory default settings are
in bold.
Table2-1. SW1Configuration Parameters for Switches 1 through 3
Switches
Indication123
OFF OFF OFF SCSIID of0
OFF OFF ON SCSI ID of 1
OFF ON OFF SCSIID of2
OFF ON ON SCSI ID of 3
ON OFF OFF SCSIID of4
ON OFF ON SCSI ID of 5
ON ON OFF SCSI ID of 6
ON ON ON SCSI ID of 7
Table2-2. SW1Configuration Parameters for Switches 4 through 8
Switches
Indication45678
OFF OFF OFF OFF OFF GPIBPrimary Address 0
OFF OFF OFF OFF ON GPIB Primary Address 1
OFF OFF OFF ON OFF GPIB Primary Address 2
OFF OFF OFF ON ON GPIBPrimary Address 3
OFF OFF ON OFF OFF GPIB Primary Address 4
OFF OFF ON OFF ON GPIB Primary Address 5
OFF OFF ON ON OFF GPIBPrimary Address 6
OFF OFF ON ON ON GPIB Primary Address7
GS.book Page 3 Tuesday,June12, 2001 2:17PM