Index
NI-488.2 User Manual for Windows I-4 www.natinst.com
EOI (end or identify) line
purpose (table), A-3
termination of data transfers, 7-1
EOIP error code, C-6 to C -7
EOSconfiguring EOS mode, 7-1to 7-2
EOS comparison method, 7-1
EOS read method, 7-2
EOS write method, 7-1
ERR status word condition
bit position, hex value, and type
(table), 3-6
description, B-2
error codes and solutions
EABO, C-5
EADR, C-4
EARG, C-4
EBUS, C-8
ECAP, C-7
ECIC, C-2toC-3
EDMA, C-6
EDVR, C-2, D-1 t o D-2
EFSO, C-7
ENEB, C-5to C-6
ENOL, C-3
EOIP, C-6toC-7
ESAC, C-5
ESRQ, C-8 to C -9
ESTB, C-8
ETAB, C-9
GPIB error codes (table), C-1
error conditions
communication errors, 4-5
repeat addressing, 4-5
termination method, 4-5
configuration errors, 4-3
Interactive Control utility error
information, 6-10 to6-11
timing errors, 4-4
error variable (iberr), 3-7
ESAC error code, C-5
ESRQ error code, C-8 to C-9
ESTB error code, C-8
ETAB error code, C-9
event notification. See asynchronous event
notification in Win32 applications.
Event Status bit (ESB), 7-12to 7-13
execute function n times (n *) function,
Interactive Control utility, 6-10
execute indirect file ($) function, Interactive
Control utility, 6-10
execute previous function n times (n * !)
function, Interactive Control utility, 6-10
existing applications, running
DOS NI-488.2 applications
Windows 98/95, 3-17
Windows 2000/NT, 3-18
Win32 and Win16 NI-488.2
applications, 3-17
F
FindLstn function, 3-11
FindRQS function, 7-15, 7-16
G
General Purpose Interface Bus. See GPIB.
global variables, 3-5 to 3-7
count variables (ibcnt and ibcntl), 3-7
debugging applications, 4-2
error variable (iberr), 3-7
status word (ibsta), 3-5to 3-7
writing multithread Win32 GPIB
applications, 7-9 to7 -10
GPIB
configuration, 1-1 to1-3 . See also
Interactive Control utility.
controlling more than one board, 1-2
linear and star system configuration
(figure), 1-1
requirements, 1-2 to 1-3