Appendix C Troubleshooting NI PXI-CardBus-8310 Cards
© National Instruments Corporation C-3 NI CardBus-8310-to-PXI Expansion User Manual
• Try ejecting and re-inserting the CardBus card.
• Power down the laptop and the chassis system. Power up the chassis
first and then power up the computer.
Issue: One or more LEDs are not lit on the NI PXI-8310 card.
This may be a defective hardware. Please call customer service for support.
Note The hardware may still appear to function, but at a reduced bandwidth.
Issue: An error is returned after inserting the CardBus card before
installing the CardBus card driver.
1. Go to Windows Device Manager»View»Devices by connection, as
shown in FigureC-1.
Figure C-1. Devices by Connection Menu in Device Manager
2. Remove the CardBus card from the PCMCIA slot. Install the NI
CardBus Driver 1.0 from the provided driver CD.
After installing the NI CardBus-8310 Driver, the CardBus device will be
visible in Device Manager.