© National Instruments Corporation 2-1 NI PXIe-8130 User Manual
2
Installation and Configuration
This chapter contains information about installing and configuring your
NIPXIe-81 30 controller.

Installing the NI PXIe-8130

This section contains general installation instructions for the
NIPXIe-81 30. Consult your PXI Express chassis user manual for specific
instructions and warnings.
1. Plug in your chassis before installing the NI PXIe-8130. The power
cord grounds the chassis and protects it from electrical damage while
you install the module.
Caution To protect both yourself and the chassis from electrical hazards, leave the chassis
powered off until you finish installing the NIPXIe-8130 module.
2. Remove any filler panels blocking access to the system controller slot
(Slot 1) in the chassis.
3. Touch the metal part of the case to discharge any static electricity that
might be on your clothes or body.