Chapter 1 Introduction
PC-DIO-24/PnP User Manual 1-4
©
National Instruments Corporation
Figure 1-1. The Relationship between the Programming Environment,
NI-DAQ,and Your Hardware
Register-Level Programming
The final option for programming any National Instruments DAQ
hardware is to write register-level software. Writing register-level
programming software can be very time-consuming and inefficient,
and is not recommended for most users.
Even if you are an experienced register-level programmer, consider
using National Instruments application software to program your
National Instruments DAQ hardware. Using the National Instruments
application software is easier than, and as flexible as, register-level
programming, and can save weeks of development time.
ComponentWorks,
LabVIEW,
LabWindows/CVI, or
VirtualBench
Conventional
Programming Environment
NI-DAQ
Driver Software
DAQ or
SCXI Hardware
Personal
Computer or
Workstation