National Instruments PC-LPM-16/PnP , Bipolar Input Selection 2 (, Unipolar Input Selection 1 (0 to 10 V), , 2.5 V), , ,

Appendix C Using Your PC-LPM-16 (Non-PnP) Board
 National Instruments Corporation C-11 PC-LPM-16/PnP User Manual
Figure C-5. Bipolar Input ( ± 5 V) Jumper Configuration (Factory Setting)
Bipolar Input Selection 2 ( ± 2.5 V)
Select the bipolar ( ± 2.5 V) input configuration by setting jumpers W1
and W2 as shown in Figure C-6.
Figure C-6. Bipolar Input ( ± 2.5 V) Jumper Configuration
Unipolar Input Selection 1 (0 to 10 V)
Select the unipolar (0 to 10 V) input configuration by setting jumpers
W1 and W2 as shown in Figure C-7.
Figure C-7. Unipolar Input (0 to 10 V) Jumper Configuration
W1
C
B
A
W2
C
B
A
W1
C
B
A
W2
C
B
A
C
B
A
C
B
A
W1 W2