©
National Instruments Corporation I-1 VXI/VME-PCI802 2 for Sola ris

Index

A
A16 base address, VMEbus, 4-3 to 4-4
A16 write posting, VME/VXI-MXI-2, 6-21 to
6-22
A24/A32 write posting
PCI-MXI-2, 6-17
VME/VXI-MXI-2, 6-21 to 6-22
address space configuration
PCI-MXI-2, 6-6
VME/VXI-MXI-2, 6-21
arbiter timeout, setting, 6-27
arbiter type, setting, 6-26
arbitration mode, interlocked, 6-22 to 6-23
automatic retry feature, setting
MXI-2, 6-16 to 6-17
MXIbus, 6-28 to 6-29
VXI/VME, 6-25
B
BTO. See Bus Timeout (BTO) value, setting.
bulkhead cables, D-3
bulletin board support, E-1
Bus Configuration Editor. See PCI-MXI-2 Bus
Configuration Editor.
Bus Timeout (BTO) value, setting
MXIbus, 6-15, 6-27 to 6-28
VXI/VME, 6-24
C
C programs
compiling, 7-4 to 7-5
sample programs, 7-4
symbols, 7-4 to 7-5
cables, rugged, D-3
CLK10 routing, VXIbus, 3-8 to 3-12
CLK10 generated from MXIbus
(figure),3-9
CLK10 generated from onboard oscillator
(figure), 3-9
CLK10 generated from SMB (figure), 3-9
drive inverted external CLK SMB
(figure),3-11
drive non-inverted external CLK SMB
(figure), 3-11
receive external CLK SMB (figure), 3-11
receive external CLK SMB with 50 ohm
termination (figure), 3-11
receiving or driving MXIbus CLK10
(figure), 3-12
CLK10 signal, MXIbus
common questions, D-3
setting, 6-15 to 6-16, 6-30
CloseVXIlibrary function, 7-4
common questions about NI-VXI software, D-1
to D-7
compiling C programs, 7-4 to 7-5
symbols, 7-4 to 7-5
configuration
configuration editors. See PCI-MXI-2
Configuration Editor; VXI/VME-MXI-2
Configuration Editor.
default settings, 1-10 to 1-15
PCI-MXI-2 board, 2-1 to 2-3
configuration EEPROM, 2-3