Chapter 4 VME-MXI-2 Configuration and Installation
VXI/VME-PCI8022 for Solaris 4-10
©
National Instruments Corporation
Install the VME-MXI-2
This section contains general installation instructions for the
VME-MXI-2. Consult your VMEbus mainframe user manual or
technical reference manual for specific instructions and warnings.
1. Plug in your mainframe before installing the VME-MXI-2. The
power cord grounds the mainframe and protects it from electrical
damage while you are installing the module.
Warning: To protect both yourself and the mainframe from electrical hazards, the
mainframe should remain off until you are finished installing the
VME-MXI-2 module.
2. Remove or open any doors or covers blocking access to the
mainframe slots.
2 M x 32 or
2 M x 36 —8 MB YES ON
2 M x 32 or
2 M x 36 2 M x 32 or
2 M x 36 16 MB — ON
4 M x 32 or
4 M x 36 —16 MB YES OFF
4 M x 32 or
4 M x 36 4 M x 32 or
4 M x 36 32 MB — OFF
8 M x 32 or
8 M x 36 —32 MB YES OFF
8 M x 32 or
8 M x 36 8 M x 32 or
8 M x 36 64 MB YES OFF
Table 4-1. VME-MXI-2 DRAM Configurations (Continued)
Bank 0 Bank 1 Total DRAM National
Instruments
Option?
Switch Setting
of S6