Index
VXI/VME-PCI8022 for Solaris I-8
©
National Instruments Corporation
VME-MXI-2 module
common questions, D-1 to D-4
configuration, 4-1 to 4-10
configuration EEPROM, 4-7 to 4-8
front panel features, 4-3
MXIbus termination, 4-5 to 4-6
onboard DRAM, 4-8 to 4-10
DRAM configurations (table),
4-9 to 4-10
SIMM size configuration
(figure), 4-9
parts locator diagram, 4-2
VMEbus A16 base address, 4-3 to
4-4
VME-MXI-2 intermodule signaling,
4-4 to 4-5
connecting MXIbus cable, 4-11 to 4-12
default settings
Configuration Editor settings (table),
1-14 to 1-15
hardware settings (table), 1-14
hardware description, 1-5
installation, 4-10 to 4-11
quick start installation, 1-7 to 1-8
specifications
electrical, A-10
environmental, A-10
MXIbus capability descriptions, A-8
performance, A-11
physical, A-10
requirements, A-10
VMEbus capability codes, A-9
volume management (note), 1-8, 5-1
VXI Shared RAM options, 6-7 to 6-10
advanced settings, 6-8 to 6-10
Enable Byte Swapping, 6-9
Lower Half Window and Upper Half
Window, 6-7 to 6-8
Memory Select, 6-9
Shared RAM Pool, 6-7 to 6-8
VXI/VME Shared RAM Size, 6-7
Window Mapping, 6-9 to 6-10
VXIbus CLK10 routing, 3-8 to 3-12
CLK10 generated from MXIbus
(figure),3-9
CLK10 generated from onboard oscillator
(figure), 3-9
CLK10 generated from SMB (figure), 3-9
drive inverted external CLK SMB
(figure), 3-11
drive non-inverted external CLK SMB
(figure), 3-11
receive external CLK SMB (figure), 3-11
receive external CLK SMB with 50 ohm
termination (figure), 3-11
receiving or driving MXIbus CLK10
(figure), 3-12
VXIbus local bus, 3-7 to 3-8
VXIbus logical address. See logical address.
VXIbus Slot 0/non-Slot 0, 3-5 to 3-7
VXIedit configuration utility. See also
PCI-MXI-2 Configuration Editor;
VXI/VME-MXI-2 Configuration Editor.
interacting with VXI/VME devices, 1-9
to1-10
overview, B-1 to B-2
running, 6-1 to 6-2
text equivalent of graphical VXIedit
program (note), 6-1
VME device configuration information,
1-9
VXIinit utility, B-1
vxiinreg command, 1-10
VXImemAlloc function (warning), 7-3
VXI-MXI-2 module
common questions, D-1 to D-4
configuration, 3-1 to 3-18
configuration EEPROM, 3-15 to
3-16
front panel features, 3-3
MXIbus termination, 3-13 to 3-14