ASSEMBLY

TRACTOR

Check Tire Pressure

CAUTION: Handle banding material with caution. Use heavy leather gloves. Banding is sharp!

1.Remove crating top, front, and sides.

2.Cut banding from around tractor, tires, and armrest box.

3.Separate steering wheel from tire.

4.Remove rear mower belt shield from manual lift handle.

CAUTION: Use jack stands under tractor whenever elevated off the tires.

Lift tractor up off axle crate supports to sufficiently assemble tire and wheels to the tractor.

Lower tractor down onto crate. Tractor may now be driven or rolled off the crate. To allow the tractor to roll freely without engaging the engine or drive, a tow valve is provided. It is located under the hood directly behind the engine (see Figure 3).

REAR MOWER

1.Remove rear mower from crate and position behind tractor as shown in Figure 5.

2.Pivot rear mower lifter handle (1, Figure 5) up and back to lower rear mower pull plate on the pull yoke. Position mounting flange (2, Figure 6) on the center front of the rear mower frame under the pull plate (3, Figure 6) and fasten securely with two fasteners already installed in pull plate.

3.Install V-belt (4, Figure 5) onto double groove pulley (5, Figure 5) located on the right rear side of the frame. Raise rear mower belt idler (6, Figure 5), and run V-belt under idler pulley as shown.

4.Position rear mower clutch guard (7, Figure 5) over rear mower shaft and pulley area, and fasten right side to support (8, Figure 5) with a 1/4”–20 x 1/2” round-head slotted screw. Secure rear flange of guard with (2) 1/4”–-20 x 1/2” hex head cap screws, lock washers, and nuts.

CAUTION: Avoid injury! Explosive separation of tire and rim parts is possible when they are serviced incorrectly:

•Do not attempt to mount a tire without the proper equipment and experience to perform the job.

•Do not inflate the tires above the recommended pressure.

•Do not weld or heat a wheel and tire assembly. Heat can cause an increase in air pressure resulting in an explosion. Welding can structurally weaken or deform the wheel.

•Do not stand in front or over the tire assembly when inflating. Use a clip-on chuck and extension hose long enough to allow you to stand to one side.

SEAT

1.Fasten seat /slide assembly studs (1, Figure 7) into slotted holes in hinge mounting plate (2, Figure 7) four places and fasten with four 5/16” flat washers and nuts.

2.Remove armrests (3, Figure 8) from box strap to the crate. Attach to seat with fasteners provided.

Figure 5

GB - 13

Page 12 Page 14
Page 13
Image 13
National Mower 99500500-8400 manual Assembly, Tractor, Rear Mower, Seat
Page 12 Page 14

99500500-8400 specifications

The National Mower 99500500-8400 is an advanced lawn care solution that epitomizes efficiency and innovation for users who demand high performance from their gardening equipment. Designed for residential and light commercial use, this mower combines state-of-the-art technology with robust features to ensure a seamless mowing experience.

One of the standout features of the National Mower 99500500-8400 is its powerful engine. Equipped with a high-output, fuel-efficient engine, this mower delivers consistent power that translates into excellent cutting performance. This ensures that the mower can tackle various grass types and densities, making it useful for both manicured lawns and rugged terrains.

The 99500500-8400 boasts a durable cutting deck made from high-quality materials that resist corrosion and wear. This deck is designed with precision engineering to enhance airflow for optimal grass clipping discharge, resulting in clean, even cuts regardless of lawn conditions. Furthermore, the adjustable cutting height feature allows users to customize the mower’s settings, enabling them to achieve the desired grass length for their specific needs.

In terms of technology, the National Mower incorporates advanced safety measures to enhance user experience. The intuitive safety features include a blade brake that stops the blades within seconds when the operator releases the handle, reducing the risk of accidents. Additionally, the ergonomic handle design ensures comfort during use, allowing for prolonged operation without strain.

Another impressive characteristic of the 99500500-8400 is its ease of maintenance. The mower is engineered for quick blade sharpening and simple access to engine components, making routine upkeep straightforward for users. This is complemented by a lightweight design that enhances maneuverability, allowing users to navigate through tight spots and around obstacles with ease.

Finally, the National Mower 99500500-8400 is designed with environmental sustainability in mind. The fuel-efficient engine minimizes emissions, making it an eco-friendly choice for consumers looking to maintain their lawns without compromising on their commitment to the environment.

In conclusion, the National Mower 99500500-8400 stands out as a reliable, high-performance lawn mower featuring robust power, safety, and user-friendly characteristics ideal for any homeowner or light commercial user. Its blend of innovative technology and practical design makes it a must-have for efficient lawn care.
Top Page Image Contents