6.Remove the spark plugs and wipe dry. Crank the engine (with spark plug removed) using the starter until excess oil has been expelled through the spark plug hole. Replace the plug and connect the ignition lead wires.

7.Move the vehicle outdoors or keep doors and/or windows wide open to provide sufficient ventilation before starting engine. This will prevent danger from carbon monoxide gas in the exhaust.

8.Start the engine but do not operate at high speed immediately after starting. Allow time for it to become properly warmed and lubricated.

TROUBLESHOOTING

ENGINE WILL NOT START

•The operator must be seated.

•Check position of reel control switch (on dash). Switch must be in the OFF position.

•Check to see that the traction pedal is in neutral (neutral is in the center position).

•Check all safety switches for conductivity.

•Replace switches, if necessary.

•Check fuel in tank.

•Check if fuel is at the end of fuel line at carburetor. If not, clean filter or, if necessary, replace fuel filter.

•Check battery. Check charge level; charge or replace as needed. Clean battery terminals, if necessary.

•Check spark plugs. Check for spark at spark plugs, check for foul conditions, or replace spark plugs, if necessary.

Refer to Briggs and Stratton engine manual for recommended spark plug and gap.

•Check electrical wiring and safety switch operation. Check wiring or check traction pedal neutral safety switch and adjust to allow current flow from the “S” terminal to the starter solenoid.

TRACTOR WILL NOT MOVE

•Check that parking brake is not engaged.

•Check towing (free-wheeling) valve to see that it is fully closed (in the down position).

•Check the linkage from the traction pedal to the pump control mechanism to ensure complete attachment of all linkages.

REEL WILL NOT TURN

•Check for debris jammed between the reel and bedknife.

•Check for proper belt tension. Belt tension is not adjustable.

•Test wing mower H-frames so that they are sliding easily. Lubricate, if necessary.

•Check rear mower belt tension idler to see that idler is moving freely.

•Check drive belts between engine clutch and countershaft pulley to ensure that spring loaded idler is moving freely. If slippage still occurs as a result of belt wear and belt stretch, replace belt.

REEL WILL NOT CUT

•Check the reel to bedknife clearance with common newspaper. The reel should cut through paper the entire length of the bedknife.

•Inspect reel and bedknife for damage. Service, if necessary.

•If reel is cutting grass too high, too low, or not at all, the reel height is out of adjustment. See HEIGHT OF CUT ADJUSTMENT on page 18.

•If reel is cutting grass unevenly from side to side or not at all, the distance between the reel and the bedknife is out of adjustment. See REEL TO BEDKNIFE ADJUSTMENT on page 18.

GB - 27

Page 26 Page 28
Page 27
Image 27
National Mower 99500500-8400 manual Troubleshooting, Engine will not Start, Tractor will not Move, Reel will not Turn
Page 26 Page 28

99500500-8400 specifications

The National Mower 99500500-8400 is an advanced lawn care solution that epitomizes efficiency and innovation for users who demand high performance from their gardening equipment. Designed for residential and light commercial use, this mower combines state-of-the-art technology with robust features to ensure a seamless mowing experience.

One of the standout features of the National Mower 99500500-8400 is its powerful engine. Equipped with a high-output, fuel-efficient engine, this mower delivers consistent power that translates into excellent cutting performance. This ensures that the mower can tackle various grass types and densities, making it useful for both manicured lawns and rugged terrains.

The 99500500-8400 boasts a durable cutting deck made from high-quality materials that resist corrosion and wear. This deck is designed with precision engineering to enhance airflow for optimal grass clipping discharge, resulting in clean, even cuts regardless of lawn conditions. Furthermore, the adjustable cutting height feature allows users to customize the mower’s settings, enabling them to achieve the desired grass length for their specific needs.

In terms of technology, the National Mower incorporates advanced safety measures to enhance user experience. The intuitive safety features include a blade brake that stops the blades within seconds when the operator releases the handle, reducing the risk of accidents. Additionally, the ergonomic handle design ensures comfort during use, allowing for prolonged operation without strain.

Another impressive characteristic of the 99500500-8400 is its ease of maintenance. The mower is engineered for quick blade sharpening and simple access to engine components, making routine upkeep straightforward for users. This is complemented by a lightweight design that enhances maneuverability, allowing users to navigate through tight spots and around obstacles with ease.

Finally, the National Mower 99500500-8400 is designed with environmental sustainability in mind. The fuel-efficient engine minimizes emissions, making it an eco-friendly choice for consumers looking to maintain their lawns without compromising on their commitment to the environment.

In conclusion, the National Mower 99500500-8400 stands out as a reliable, high-performance lawn mower featuring robust power, safety, and user-friendly characteristics ideal for any homeowner or light commercial user. Its blend of innovative technology and practical design makes it a must-have for efficient lawn care.
Top Page Image Contents