NATIONAL® 68" SR & DL TRIPLEX – CE
INTRODUCTION
This machine has been designed to meet European CE Safety Standards. Metric eqivalents are provided wherever possible for users outside the United States.
This manual has been prepared by National Mower Company as an aid to users for assembly, maintenance, adjustment and ordering replacement parts. Additional
information will gladly be furnished by calling or writing the manufacturer or his authorized agent.
Please furnish us with the Model Number, Serial Number and Date of Purchase when contacting us about your machine. Designations of right, left, front and rear are used as if the operator was sitting in the mower seat.
RECEIPT OF SHIPMENT
Carefully inspect your machine and crate for dam- age that could have occured during shipment. If damages or shortages are noted, have the transportation company’s representative note this on the bill of lading.
NOTE
Claims for shipping damages must be noted by the consignee at the point of destination and filed with the transportation company that delivers the shipment.
UNCRATING INSTRUCTIONS
In order to prevent possible damage to the machine or personal injury, the following uncrating procedure must be followed:
1.Position Crate 1 as shown in Figure A, on a hard, level surface.
2 Cut and remove all Steel Banding (2, Fig. A).
3.Remove the entire top of the crate. Unbolt Seat (3, Fig. A) from crate bracing and lay seat aside for installation later. Save the bolt and washer to use for mounting the seat mounting member.
4.Lift Rear Mower (4, Fig. A) off the crate supporting members and set aside for later attachment.
CAUTION
Handle mowers carefully with protective gloves.
Reels rotate freely and are very sharp.
5.Make sure Wing Mowers (5, Fig. A) are secure to the mower frame with Wing Mower Hooks (15, Fig. B).
6.Knock down all sides of crate and remove. Roll mower backwards off of crate base.
FIGURE A
9
