AC Wiring
TO DC LOADS
|
|
| GND |
|
|
| AC |
|
| L | IN er |
|
| any oth | |
GND | L | NtheAC OoccUTutro. |
|
COAAUUTCIoTOfpNo!wNerDo. | Dnaomtcaognentoectunit may |
| |
source |
|
|
|
Note: Do NOT connect the
AC OUT Neutral and Line to the AC IN Neutral and Line.
CAUTION! Do not connect the AC OUT to any other source of power. Damage to unit may occur.
MAIN AC PANEL
TRANSFER SWITCH
AC OUTLETS
| Input breakers must |
| be provided by |
INVERTER LOADS | installers. |
Figure 3-7 AC Wiring Diagram without an Inverter Subpanel
GENERATOR
SHORE POWER
In this wiring diagram, the AC input comes directly from an AC source. The AC input must be limited with (input) breaker protection of 15 amps for the XM1000 and 20 amps for the XM1800. The output is routed to the main AC panel or circuit breaker.
