Installation
Installing the Remote Panel
You can detach and reinstall the remote panel to monitor and operate the XM 1800 up to 25 feet (7.62 m) away from the unit.
RJ11 jack
T S E T
T E S T
T E S E R
R E S E T
XM 1000 shown
Figure 3-8 XM 1800 with Remote Panel Removed
To install the remote panel in another location, you will need the following tools and materials:
•screwdriver
•jigsaw
•drill (optional)
•RJ11 extension cord, with male and female jacks, with a maximum length of 25 feet (7.62 m).
To install the remote panel in another location:
1.Turn the XM 1800 off.
2.Ensure AC input power is disconnected.
3.Remove the two screws securing the remote panel to the XM 1800 and set them aside.
4.Remove the remote panel and unplug the remote panel RJ11 cord from the jack (see Figure
