BEFORE OPERATING, smell all around appliance area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle on the floor.

WARNING: IF YOU SMELL GAS:

·Do not attempt to operate any appliance; do not touch any electric switch; do not use any phone in your building.

·Leave the building immediately and call your gas supplier. · If your gas supplier cannot be reached, call the fire department.

WARNING: When turning gas control knob, use only your hand to turn knob. Never use tools. If knob will not operate by hand, control must be replaced by a qualified service technician. Force or attempted repair may result in a fire or explosion.

WARNING: If any part of this appliance has been under water, do not operate. Immediately call a qualified service technician to inspect the appliance and to replace any part of gas control system which has been under water.

GAS VALVE OPERATING INSTRUCTIONS

A.To Turn On Gas To Appliance

1.STOP! Read safety information in For Your Safety Read Before Operating section.

2.Set thermostat to lowest setting.

3.Turn off all electrical power to appliance.

4.This appliance is equipped with an ignition device which automatically lights burner. Do NOT try to light burner by hand.

5.Remove burner access panel.

6.Turn gas control knob clockwise to OFF position. (See Fig. 8.)

WARNING: Wait 5 minutes to allow any gas in the combustion chamber to vent. If you then smell gas in appliance area or near the floor, do not touch any electrical switch; do not use the phone. Leave the building immediately and call your gas supplier. If your gas supplier cannot be reached, call the fire department. Failure to do so may result if a fire or explosion. If you do not smell gas, go to the next item.

7.Turn gas control knob counterclockwise to ON position. (See Fig. 8.)

8.Turn on all electrical power to appliance.

9.Set thermostat to desired setting.

10.After visually inspecting flame, replace lower front panel.

WARNING: If appliance will not operate after several tries, turn gas control knob to OFF position and call your service technician or gas supplier.

B.To Turn Off Gas To Appliance

1.Set thermostat to lowest setting.

2.Turn off all electric power to appliance if service is to be performed.

3.Turn gas control knob clockwise to OFF position. (See Fig. 8.) Do not force.

GAS

INLET

ON

OFF

GAS CONTROL

KNOB SHOWN

IN "ON" POSITION

A95154

Fig. 8ÐGas Valve

Ð15Ð

Page 15
Image 15
National Products BW3 GAS Valve Operating Instructions, To Turn On Gas To Appliance, To Turn Off Gas To Appliance, Ð15Ð

BW3, Series B specifications

National Products Series B and BW3 are pioneering additions to the realm of mobile workstation solutions, designed specifically for professionals who operate in fast-paced environments. These rugged and versatile products cater to a variety of sectors, including law enforcement, emergency response, and field service, ensuring that users remain efficient and organized while on the move.

The Series B is notable for its robust construction, built to withstand the rigors of constant use in challenging conditions. With a lightweight yet durable design, it combines portability with the resilience necessary for demanding applications. This series excels in adaptability, featuring multiple mounting options that can accommodate various devices, including laptops, tablets, and even larger screens. The flexibility to adjust the mount for optimal user comfort makes it suitable for long hours of operation.

One of the standout features of the Series B is its innovative Quick Release technology. This allows users to swiftly secure or detach devices with minimal effort, essential for those who need to move quickly between vehicles or locations. Additionally, the series is equipped with an array of cable management solutions, keeping workspaces organized and clutter-free—an essential consideration for professionals who rely on multiple devices.

The BW3 series takes mobility a step further by emphasizing a balance between form and function. With a streamlined design, the BW3 is as aesthetically pleasing as it is practical. Its integrated power management system features built-in charging ports, enabling users to keep their devices powered throughout the day. This aspect is particularly beneficial for professionals who rely on GPS, communication tools, and other electronic devices in the field.

Both the Series B and BW3 incorporate advanced materials that enhance their durability. These innovations include weather-resistant coatings and anti-corrosive finishes, guaranteeing longevity and reliability even under adverse conditions.

In summary, the National Products Series B and BW3 are finely crafted mobile workstation solutions that seamlessly integrate technology and functionality. Their key features—including Quick Release mounts, extensive device compatibility, and robust construction—make them indispensable tools for demanding professionals. By prioritizing user comfort and efficiency, these products elevate the standards of mobile work environments, empowering users to excel in their respective fields.