Controls and Indicators
Shallow Alarm
This alarm sounds when the water depth equals or is less than the set value.
The display will show “S X.X” which is the current setting for the shallow alarm. Pressing and will change the shallow setting.
Shallow Display
CORC122
Holding M in for two seconds will save the new shallow setting and change the display back to the normal depth mode. Set to zero to disable the alarm.
Deep Alarm
This alarm sounds when the water depth equals or is greater than the set value.
The display will show “d XX.X” which is the current setting for the deep alarm.
Deep Display
CORC123
Pressing and will change the deep setting.
Holding M in for two seconds will save the new deep setting and change the display back to the normal depth mode. Set to zero to disable alarm.
