Ripwave Modem User Guide Navini Networks, Inc.
12 Copyright © 2003 Navini Networks, Inc. All rights reserved. Part #40-00097-00 Rev E v1.0
July 30, 2003
Installing an Ethernet Modem
(See, also, Addendum 1)
The following instructions are for the installation of a Ripwave
Modem that has a USB connection. Please read all instructions
before attempting the installation. It is advisable to turn off the
computer and the Ripwave Modem before performing the
installation.

Step Action Illustration

1. Connect the Ethernet
cable to the Ethernet
port on the computer.
2. Connect the other end of
the Ethernet cable to the
Ripwave Modem.
3. Connect the AC power
adapter to the Ripwave
Modem. Plug the other
end into a 110 VAC
outlet.
CAUTION! Only use
the AC power adapter
specifically supplied
with the Ripwave
Modem. Using any other
adapter may cause
damage to the Modem.
Ethernet
AC Power
adapter cable
j
ack