Step Action Illustration | Navini Networks 40-00097-00 specification

Navini Networks, Inc.

Ripwave Modem User Guide

Step

7.Turn your computer ON and log in.

NOTE: For Windows 2000, you must be logged into an account having Administrative privileges to install the Ripwave Modem and its software.

8.Plug-and-Play will detect the Ripwave device now attached to the computer, and it will launch the Plug-and- Play application.

If this does not happen, the problem may be due to one of the following:

•Windows NT and Windows 95 do not support a USB device.

•The Modem is not turned on.

•The Modem is not connected properly to the computer.

9.The Add New Hardware Wizard dialog box appears. Click Next to continue.

Part #40-00097-00 Rev E v1.0	Copyright © 2003 Navini Networks, Inc. All rights reserved.	17
July 30, 2003