8-29
Be sure to set your password to prevent anyone other than an
administrator from changing the NCT-2000-XP console settings.
You can set a password when you install the NCT-2000-XP application.
To set a password when you install the program, enter a password in
the ‘New Password” and ‘Confirm Password’ and click the <Next>
button instead of selecting ‘Do not set administrator password.’
21. How to set the password of the NCT-2000-
XP program
Go to <Start> <All Programs> <NCT-2000-XP> <NCT-2000-
XP Console>. Go to <Software Settings (local)> <Information &
Settings> Select <System Settings> and then double-click the
‘Administrator Password’ option on the right.
1
If ‘Disable password protection’ is
checked, uncheck the option. Type
new password in the ‘Password’
and ‘Retype Password’ column.
Then click the <Change Password>
button. Click the <OK> button or
<Apply> button.
2
A user can set a USB storage device connected to a host computer so that
a specific PC Expanion can access it. The L200 model provides a USB port
so that a USB device can be connected to it directly. A USB storage device
directly connected to the L200 is not accessible by a user using another
PC Expanion. Only a user using the L200 can access a USB storage device
directly connected.
* The USB port on the L200 model does not
support the USB device or USB storage device
or USB printer under Linux.