NComputing L200, L120 How to set the resolution and frequency on the PC Expanion, Host computer

29.How to set the resolution and frequency on the PC Expanion

You can set the resolution and frequency of the PC Expanion to be used when it is connected to a host computer in advance.

The specified resolution and frequency overrules the resolution and frequency settings made when you initially set up the

host computer.

How to configure in the PC Expanion.

1Click the <Setup> button or the <Setup> of <Options> button in the startup screen of PC Expanion.

2‘Select ‘TS Options’ tab and the terminal server of the connection list. Then click the <Enable- Disable> button. Click the <Edit> button in order to set the information of the host PC.

8-40

3Select the resolution and frequency in the ‘Desktop size’ field. Available resolutions are displayed depending on your product model. ‘Mode Test’ is a function to test a selected resolution before applying it so that you can check if a selected resolution is supported by your monitor. Since some resolutions may not be supported by your monitor, use the ‘Mode Test’ function to check. Click the <OK> button and then the <Save> button.

How to set in the NCT-2000-XP console

1 Go to <Start> <All Programs> <NCT-2000-XP> <NCT- 2000-XP Console>. Go to <Hardware Settings (Local/LAN)> Select <UTMA/UTSA Devices> and then double-click the desired PC Expanion.