Using Message Notification (cont'd)

Note:You can make the following special entries in the notification number.

Enter these codes: For this special entry:

❋F■Flash
❋H■Wait 2 seconds to hear any type of sound (if
none, NVM-Seriesterminates the call).
❋W■Wait 2 seconds for dial tone (if none,
NVM-Series terminates the call).
❋P■Non-monitored pause (NVM-Seriespauses 2
seconds, then dials next digit.)
❋M■Monitored pause (NVM-Series pauses 2
sec, then dials the next digit if there is no
busy/reorder tone. Otherwise,
NVM-Series hangs up.) This option is not
available in NVM-2e.
❋A■Analyzed pause (NVM-Seriespauses 4 sec,
then dials the next digit if no busy/reorder
tone. Otherwise NVM-Serieshangs up.)
❋❋ ■❋
❋#■#
❋0■Clear number

53

Using Mailbox Options
17600sug05.qxd 3/13/01 12:01 PM Page 53