Cut Here
Installing the LocalTalk and Serial Interface Card
10.Position the printer so you have access to the back.
11.Remove screw from the metal back plate (A).
12.Insert Interface Card into the printer (B).
AB
13.Connect card with socket on Controller Board (C).
14.Use screw, removed in Step 2, to fasten card (D).
CD
Connect with socket
Cut Here
Cut Here
Second Fold Here
Second Fold Here
Cut Here
Installing the LocalTalk and Serial Interface Card (cont)
15.Use previous procedure (Step 1 to Step 9, "Accessing the Printer Controller Board") as a guide to replace printer
16.If only using the serial connection, go to Step 11.
17.Connect Apple LocalTalk cable to interface card (E).
E
18.Connect the other end of the LocalTalk cable to your Macintosh Computer.
19.Install the NEC SuperScript 1800 PPD onto your Macintosh computer as described in Chapter 3, "Installing the Software," of the SuperScript 1800 User’s
20.Guide.
See Chapter 8, "Printer Options," for information about using the serial port.
Part No.
Cut Here
Cut Here
