Rear View/ Terminal Board
42XM5
L
| B |
|
| D |
|
|
|
|
| A |
| |
VIDEO | AUDIO 1 |
| DVD1 / HD1 | AUDIO 2 |
| RGB2 / DVD2 / HD2 | RGB 1 | AUDIO 3 | RGB 3 | EXTERNAL CONTROL | REMOTE | |
2 | R |
|
| R |
|
|
| R |
|
|
|
|
1(IN/OUT) |
|
|
|
| R/Cr/Pr | G/Y B/Cb/Pb HD | VD |
| DV I ( Digital RGB ) |
|
|
|
3 |
| Y | Cb/Pb | Cr/Pr |
|
| (IN/OUT) |
|
| IN | OUT | |
| L (MONO) |
|
| L (MONO) |
|
|
| L (MONO) |
|
|
|
|
C |
|
| E |
|
| F | G |
| H | I | J | K |
AAC IN
Connect the included power cord here.
BEXT SPEAKER L and R
Connect speakers (optional) here. Maintain the correct polarity. Connect the
(positive) speaker wire to the
EXT SPEAKER terminal and the 
(negative)
speaker wire to the EXT SPEAKER terminal on both LEFT and RIGHT channels.
Please refer to your speaker’s owner’s manual.
CVIDEO1, 2, 3 (BNC, RCA,
Connect VCR’s, DVD’s or Video Cameras, etc. here. VIDEO1 can be used for Input or Output.
DAUDIO1, AUDIO2, AUDIO3 These are audio input terminals.
The input is selectable. Set which video image corresponds to the audio input from the audio menu screen.
EDVD1 / HD1
Connect DVD’s, High Definition or Laser Discs, etc. here.
FRGB2/ DVD2/ HD2
RGB2: | You can connect an analog RGB signal |
| and the syncronization signal. |
DVD2/ HD2: You can connect DVDs, High Definition sources, Laser Discs, etc. here.
This input can be set for use with an RGB or component source.
GRGB1 (mini
Connect an analog RGB signal from a computer, etc. here. This input can be used for Input or Output.
HRGB3 (DVI 24pin)
Connect a digital signal (TMDS) from a source with a DVI output.
This input can be set for use with an RGB3.
IEXTERNAL CONTROL
This terminal is used when operating and controlling the monitor externally with a control system (by RS- 232C).
JREMOTE IN
Connect the remote cable to the remote control’s remote jack to obtain wired remote control.
KREMOTE OUT
Connect the remote cable to the REMOTE IN jack of the other display monitor to obtain wired remote control.
LHandles
Use when installing or carrying the plasma monitor.