Option1 Settings Menu
Setting the
This sets the position of the menu, the display format (horizontal or vertical) etc.
Example: Turning the DISPLAY OSM off
On “OPTION1” menu, select “OSM”, then press the MENU/ ENTER button.
The “OSM” menu appears.
On “DISPLAY OSM” of “OSM” menu, select “OFF”.
|
| OSM |
|
DISPLAY OSM | : | OFF | |
OSM ADJ. |
| : | 1 |
OSM ANGLE | : | H | |
OSM ORBITER | : | OFF | |
OSM CONTRAST | : | LOW | |
|
|
|
|
SEL. | ADJ. |
| EXIT RETURN |
Information
DISPLAY OSM settings
ON: The informations on screen size, volume control, etc. will be shown.
OFF: The informations on screen size, volume control, etc. will not be shown.
The DISPLAY button on the remote control will not function either.
OSM ADJUST settings
Adjusts the position of the menu when it appears on the screen. The position can be set between 1 to 6.
OSM ANGLE settings
Sets the display format (landscape “H” or portrait “V”). When the unit is installed vertically set the OSM ANGLE at “V”.
“H” |
|
| “V” |
| ||
|
|
|
|
| ||
| OPTION 1 | 1 / 4 |
| OPTION1 | ||
| OSM |
|
|
| OSM |
|
| BNC INPUT | : | RGB |
|
|
|
| : | RGB |
| BNC INPUT |
| |
| RGB SELECT | : | AUTO |
|
| |
| HD SELECT | : | 1080B |
| : | RGB |
| INPUT SKIP | : | OFF |
| ||
| ALL RESET | : | OFF |
| : | RGB |
| NEXT PAGE |
|
|
| RGB SELECT | |
| SEL. MENU/ENTER OK |
| EXIT RETURN |
| ||
|
|
|
|
| : | AUTO |
|
|
|
|
| HD SELECT |
|
|
|
|
|
| : | 1080B |
|
|
|
|
| INPUT SKIP |
|
|
|
|
|
| : | OFF |
|
|
|
|
| ALL RESET |
|
|
|
|
|
| : | OFF |
|
|
|
|
|
| 1024768 |
|
|
|
|
| SEL. MENU/ENTER OK | |
|
|
|
|
|
| EXIT RETURN |
*The menu language for “V” is English only.
*Some menu items including LONG LIFE mode will not be displayed with “V”, but can be performed by setting with “H” (See pages 19 and 20 for the menu items that can be displayed with “V”).
OSM ORBITER settings
ON: The position of the menu will be shifted by eight dots each time OSM is displayed.
OFF: OSM will be displayed at the same position.
OSM CONTRAST settings NORMAL: OSM brightness is set to normal.
LOW: OSM brightness is set to lower. |
Setting the BNC input connector type
Select whether to set the input of the 5 BNC connectors to RGB or Component.
Example: Set the “BNC INPUT” mode to “COMP.”
On “BNC INPUT” of “OPTION1” menu, select “COMP.”.
| OPTION 1 | 1 / 4 |
OSM |
|
|
BNC INPUT | : | COMP. |
: | RGB | |
RGB SELECT |
|
|
: | AUTO |
|
HD SELECT | : | 1080B |
INPUT SKIP | : | OFF |
ALL RESET | : | OFF |
NEXT PAGE |
| |
SEL. | ADJ. | EXIT RETURN |
Information
BNC INPUT Settings
RGB: Use the 5BNC terminals for RGB input.
COMP.: Use the 3BNC terminals for component input.
Checking the signal being transmitted to RGB1 terminal
Use this to confirm the signal being transmitted to the RGB1 terminal.
It is set to RGB and can not be adjusted.
OPTION 1 | 1 / 4 | |
OSM |
|
|
BNC INPUT | : | RGB |
: | RGB | |
RGB SELECT |
|
|
: AUTO |
|
|
HD SELECT | : | 1080B |
INPUT SKIP | : | OFF |
ALL RESET | : | OFF |
NEXT PAGE |
|
|
CAN NOT ADJUST |
|
|
Setting a computer image to the correct RGB select screen
With the computer image, select the RGB Select mode for a moving image such as (video) mode, wide mode or digital broadcast.
Example: Setting the “RGB SELECT” mode to “852480 ”
On “RGB SELECT” of “OPTION1” menu, select “852480”.
| OPTION 1 | 1 / 4 | |
OSM |
|
|
|
BNC INPUT |
| : | RGB |
: | RGB | ||
RGB SELECT |
|
| |
: | 852480 |
|
|
HD SELECT |
| : | 1080B |
INPUT SKIP |
| : | OFF |
ALL RESET |
| : | OFF |
NEXT PAGE |
|
| |
SEL. | ADJ. |
| EXIT RETURN |
Information
RGB SELECT modes
AUTO: Select the suitable mode for the specifications of input signals as listed in the table “Computer input signals supported by this system” on page
The others: The available resolutions are shown. See page