NEC SPLIT SCREEN Operations

SPLIT SCREEN Operations

Showing a couple of pictures on the screen at the same time

*There may be some RGB-input signals that may not be displayed as not all signals are supported.

1.Press the button to select a screen mode from among single mode, side-by-side, and picture-in-picture.

		VIDEO1
		A	SINGLE
SINGLE			button
button
	SIDE BY SIDE	PICTURE IN PICTURE
	button	button
	SIDE BY SIDE
	button
VIDEO1	RGB1	VIDEO1	RGB1
A	B		Main screen
		Sub
		screen
		PICTURE IN
		PICTURE
		button

Note:

Picture A and B on the above screen are not always of the same height.

Information

Split screen operations may not function depending on the combination of input signals. In the table below,

“” means Yes, “” means No.

			Pictures displayed on the right/main screen (Select1)
		VIDEO1	VIDEO2	VIDEO3	DVD/HD1	DVD/HD2	RGB1	RGB2	RGB3
Pictures	VIDEO1			
displayed on	VIDEO2			
the left/sub	VIDEO3			
screen	DVD/HD1				
(Select2)	DVD/HD2							
	RGB1						
	RGB2							
	RGB3								

Split screen operations may not function depending on the frequency of the RGB signals.

Operations in the Side-by-side mode

To change the picture size, press the cursor   or  button.

				
VIDEO1	RGB2	button	RGB2	button	RGB2
		VIDEO1		VIDEO1

A	B		A	B		A	B
					
Side-by-Side2-R		button	Side-by-Side1		button	Side-by-Side2-L
							
button	button		button	button		button	button
					
VIDEO1	RGB2	button	VIDEO1	RGB2	button	VIDEO1	RGB2
A	B		A	B		A	B
					
Side-by-Side4-R		button	Side-by-Side3		button	Side-by-Side4-L

To swap the picture on the right and the left, press the cursor  button.

VIDEO1	RGB1
A	B

 button

RGB1 VIDEO1

B A

To make the desired picture active, press the SELECT/ FREEZE button.

VIDEO1	RGB1
A	B

SELECT/FREEZE button

VIDEO1 RGB1

A B

En-16