Information
AUTO ID settings
ON: Enables Auto ID function. In the case shown below, display 1 will be set as ID 1, display 2 as ID2, etc. This can be set only when a 22, 33, 15 or 51 is selected.
|
|
|
|
| REMOTE |
|
|
|
|
| |
REMOTE |
| No.1 | No.2 |
| OUT |
| No.1 | No.2 |
| REMOTE | |
|
|
|
|
|
| ||||||
IN |
| No.4 | No.3 |
| REMOTE |
| No.4 | No.3 |
| OUT | |
|
|
|
|
| IN |
|
|
|
|
| |
|
| Display 1 |
|
|
| Display 2 |
| ||||
|
|
|
|
| REMOTE |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
REMOTE |
| No.1 | No.2 |
| OUT |
|
| No.1 | No.2 |
| REMOTE |
|
|
|
|
|
| ||||||
OUT |
| No.4 | No.3 |
| REMOTE |
|
| No.4 | No.3 |
| IN |
|
|
|
|
| IN |
|
|
|
|
|
|
|
| Display 4 |
|
|
| Display 3 |
| ||||
OFF: Disables Auto ID function.
Note: To use this function, you have to connect the displays with the remote cable (not supplied).
IMAGE ADJUST
The position of the image can be adjusted and flickering of the image can be corrected.
Example: Adjusting the vertical position
On “VIDEO WALL” menu, select “IMAGE ADJUST”, then press the MENU/ENTER button.
The “IMAGE ADJUST” screen appears.
*From the second monitor onward, neither the POWER button on the unit nor the POWER ON button on the
remote control works. However, by pressing and holding the POWER ON button for more than 3 seconds, the monitor will be turned on.
OFF: Turns on the main power of all displays at the same time.
(Only for 44 and 55 video wall modes) MODE1: Turns on the main power of each display delayed.
MODE2: Turns on the main power of each display more delayed.
OFF: Turns on the main power of all displays at the same time.
Note: To use this function, you have to connect the displays with the remote cable (not supplied).
PLE LINK
Use this function to set a uniform brightness for each display.
Turn on the AUTO ID and set the DIVIDER (at 1, 22, 33, 15 or 51) before the following operations.
Example: Setting “ON”
On “PLE LINK” of “VIDEO WALL” menu, select “ON”, then press the MENU/ENTER button.
VIDEO WALL
On
| IMAGE ADJUST |
|
|
|
|
| |||||
ASPECT MODE | : | NORMAL |
|
|
|
|
| ||||
V- POSITION |
|
|
|
| : ± 0 |
|
|
|
| ||
H - POSITION |
|
|
|
| : ± 0 |
|
|
|
| ||
V- HEIGHT |
|
|
| : | 0 |
|
|
|
| ||
H - WIDTH |
|
|
| : | 0 |
|
|
|
| ||
AUTO PICTURE | : | OFF |
|
|
|
|
| ||||
FINE PICTURE |
|
|
|
| : | 0 |
|
|
|
| |
PICTURE ADJ. |
|
|
|
| : | 0 |
|
|
|
| |
UNDERSCAN | : | OFF |
|
|
|
|
| ||||
SEL. | ADJ. |
| EXIT RETURN |
|
|
| : +64 | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Information
IMAGE ADJUST settings
These are the same functions as the IMAGE ADJUST menu on page
P. ON DELAY (Power on delay)
Use this function to activate
Turn on the AUTO ID before the following operations.
Example: Setting “ON”
On “P. ON DELAY” of “VIDEO WALL” menu, select “ON”.
VIDEO WALL
DIVIDER |
| : | 1 |
POSITION |
|
|
|
DISP. MODE | : | SPLIT | |
AUTO ID |
| : | OFF |
IMAGE ADJUST |
|
| |
P. ON DELAY | : | ON | |
PLE LINK |
| : | OFF |
|
|
|
|
SEL. | ADJ. |
| EXIT RETURN |
Information
P. ON DELAY settings
(Video wall modes other than 44 and 55)
ON: Turns on the main power of each display after a delay time.
*Once this function has been set to “ON”, the POWER ON/OFF button on the remote control does not function except for the No.1 monitor.
By pressing the POWER ON button on the remote control the No.1 monitor will turn on and the others
will be turned on one by one automatically. | |
|
|
DIVIDER |
| : | 1 |
POSITION |
|
|
|
DISP. MODE | : | SPLIT | |
AUTO ID |
| : | OFF |
IMAGE ADJUST |
|
| |
P. ON DELAY | : | OFF | |
PLE LINK |
| : | ON |
|
|
|
|
SEL. | ADJ. |
| EXIT RETURN |
Information
PLE LINK settings
ON: Sets a uniform brightness for each screen in a video wall. This can be set only when a 1, 22, 33, 15 or 51 video wall is selected.
OFF: Sets the individual screen brightness for each screen in a video wall.
*When this function is set “ON”, connect your plasma displays with the remote cable (optional) in the order of the position numbers for the 22 video wall. See the drawing below.
*If there are changes in the DIVIDER or POSITION, the PLE LINK will automatically turn OFF.
|
|
|
|
| REMOTE |
|
|
|
|
|
| |
REMOTE |
| No.1 | No.2 |
| OUT |
|
| No.1 | No.2 |
| REMOTE | |
|
|
|
|
|
|
| ||||||
IN |
| No.4 | No.3 |
|
| REMOTE |
| No.4 | No.3 |
| OUT | |
|
|
|
|
|
|
| IN |
|
|
|
|
|
|
| Display 1 |
|
|
|
| Display 2 |
| ||||
|
|
|
|
|
| REMOTE |
|
|
|
|
| |
REMOTE |
| No.1 | No.2 |
|
| OUT |
| No.1 | No.2 |
| REMOTE | |
|
|
|
|
|
|
| ||||||
OUT |
| No.4 | No.3 |
| REMOTE |
|
| No.4 | No.3 |
| IN | |
|
|
|
|
| IN |
|
|
|
|
| ||
|
| Display 4 |
|
|
|
| Display 3 |
| ||||
*With the 33, 15 or 51 video wall, connect the final display to the first display the same way as with 22 video wall.
Note:
*The remote control can be operated unless the IR REMOTE is set to “OFF”.
*To use this function, you have to connect the displays with the remote cable (not supplied).