NEC FP1375X user manual Ergonomics, English-13

•Allow adequate ventilation around the monitor so that heat can

properly dissipate. Do not block ventilated openings or place the monitor near a radiator or other heat sources. Do not put anything on top of monitor.

• The power cable connector is the primary means of detaching the

CAUTION

system from the power supply. The monitor should be installed close to a power outlet which is easily accessible.

•Handle with care when transporting. Save packaging for transporting.

CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR:

•Adjust the monitor height so that the top of the screen is

at or slightly below eye level. Your eyes should look slightly downward when viewing the middle of the screen.

• Position your monitor no closer than 40 cm and no further away than 70 cm from your eyes. The optimal distance is 60 cm.

• Rest your eyes periodically by focusing on an object at least 6 m away. Blink often.

•Position the monitor at a 90° angle to windows and other light sources to minimize glare and reflections. Adjust the monitor tilt so that ceiling lights do not reflect on your screen.

•If reflected light makes it hard for you to see your screen, use an anti-glare filter.

•Clean your monitor regularly. Use a lint-free, non-abrasive cloth and a non- alcohol, neutral, non-abrasive cleaning solution or glass cleaner to minimize dust.

•Adjust the monitor’s brightness and contrast controls to enhance readability.

•Use a document holder placed close to the screen.

•Position whatever you are looking at most of the time (the screen or reference material) directly in front of you to minimize turning your head while you are typing.

•Get regular eye checkups.

Ergonomics

To realize the maximum ergonomics benefits, we recommend the following:

•Adjust the Brightness until the background raster disappears

•Do not position the Contrast control to its maximum setting

•Use the preset Size and Position controls with standard signals

•Use the preset Colour Setting and Sides Left/Right controls

•Use non-interlaced signals with a vertical refresh rate between 75-160Hz

•Do not use primary colour blue on a dark background, as it is difficult to see and may produce eye fatigue due to insufficient contrast

English

English-13