NEC FP1375X user manual Quick Start, English-5

Quick Start

To attach the MultiSync FP1375X monitor to your system, follow these instructions:

1.Turn off the power to your computer.

2.If necessary, install the display card into your system. For more information, refer to the display card manual.

3.For the PC Analog output: Connect the VGA to DVI-A signal cable to the connector of the display card in your system (Figure A.1). Tighten all screws.

For the PC with DVI digital output: Connect the DVI-D to DVI-D signal cable to the connector of the display card in your system (Figure A.2). Tighten all screws.

For the Mac: Connect the Macintosh cable adapter (not included)to the monitor connector on the Macintosh (Figure B.1). Attach the VGA end of the captive signal cable to the Macintosh cable adapter on the computer (Figure B.1). Tighten all screws.

NOTE: Incorrect cable connections may result in irregular operation, damage display quality/components of CRT monitor.

Detachable	DVI-A	Detachable	DVI-D
		Signal Cable
Signal Cable
		USB Cable (DVI-D to DVI-D)
USB Cable (VGA to DVI-A)

English

VGADVI-D

Figure A.1 Figure A.2

English-5