Quick Start cont.

Tilt

Grasp both sides of the monitor screen with your hands and adjust the tilt as desired (Figure TS.1).

Remove Monitor Stand for Mounting

To prepare the monitor for alternate mounting purposes:

1.Remove the back cover and the cable cover (Figure R.1).

Figure TS.1

1

2

Figure R.1

2.Disconnect all cables.

3.Place monitor face down on a non-abrasive surface (Figure R.2).

4.Remove the 4 screws connecting the monitor to the stand and lift off the stand assembly (Figure R.2). The monitor is now ready for mounting in an alternate manner.

5.Connect the AC Adapter cord to the back of the monitor marked “DC in” (Figure R.3).

6.Reverse this process to reattach stand.

NOTE: Use only VESA-compatible alternative mounting method. When the monitor stand is removed, the USB capabilities will be disabled.

CAUTION Please use only the supplied AC Adapter (#A2425S01).

Figure R.2

Figure R.3

Non-abrasive surface

6

78134761.wpc

8

9/16/99, 4:10 PM

Page 8
Image 8
NEC LCD1525S user manual Tilt, Remove Monitor Stand for Mounting