Specifications –continued

Monitor

 

 

MultiSync® LCD1935NXM

Notes

Specifications

 

Monitor

 

 

LCD Module with

 

Diagonal :

19.0 inch

Active matrix; thin film transistor (TFT)

Acrylic Panel

Viewable Image Size :

19.0 inch

liquid crystal display (LCD); 0.294 mm dot

Native Resolution (Pixel Count) :

1280 x 1024

pitch; 250cd/m2 white luminence;

 

 

 

 

450:1 contrast ratio, typical

Input Signal

 

Video :

ANALOG 0.7 Vp-p/75 Ohms

 

 

 

 

Sync :

Separate sync. TTL Level

 

 

 

 

 

Horizontal sync. Positive/Negative

 

 

 

 

 

Vertical sync. Positive/Negative

 

 

Display Colors

 

 

16,194,277

Dependent on display card used.

Maximum Viewing

Left/Right :

65°/65° (CR>10)

 

 

Angles with Acrylic Panel

Up/Down :

65°/65° (CR>10)

 

 

Synchronization

 

Horizontal :

31.5 kHz to 80.0 kHz

Automatically

Range

 

Vertical :

56.0 Hz to 75.0 Hz

Automatically

Resolutions Supported

 

720 x 400*1 @ 70 Hz

Some systems may not support all modes listed.

 

 

 

640 x 480*1 @ 60 Hz to 75 Hz

 

 

 

 

 

800 x 600*1 @ 56 Hz to 75 Hz

 

 

 

 

 

832 x 624*1 @ 75 Hz

 

 

 

 

 

1024 x 768 @ 60 Hz to 75 Hz

 

 

 

 

 

1152 x 864 @ 75 Hz

 

 

 

 

 

1280 x 960 @ 60 Hz to 75 Hz

 

NEC-Mitsubishi Electronics Display cites

 

 

 

1280 x 1024 @ 60 Hz to 75 Hz .................... recommended resolution at 60 Hz for

 

 

 

 

 

optimal display performance.

Active Display Area

Horizontal :

376.0 mm/14.8 inches

 

 

 

 

Vertical :

301.0 mm/11.9 inches

 

 

Speakers

Practical Audio Output :

1.0W + 1.0W

 

 

Power Supply

 

 

100 Ð 240 V ~ 50/60 Hz

 

 

Current Rating

 

 

1.5A

 

 

Dimensions

 

 

422.2 mm (W) x 423.2 mm (H) x 195 mm (D)

 

 

 

 

16.6 inches (W) x 16.7 inches (H) x 7.7 inches (D)

Weight

 

 

13.2 lbs/6.0 kg

 

 

Environmental Considerations

 

 

 

 

 

Operating Temperature :

5°C to 35°C/41°F to 95°F

 

 

 

 

Humidity :

30% to 80%

 

 

 

 

Feet :

0 to 10,000 Feet

 

 

 

Storage Temperature :

-10°C to 60°C/14°F to 140°F

 

 

 

 

Humidity :

10% to 85%

 

 

 

 

Feet :

0 to 40,000 Feet

 

 

 

 

 

 

 

 

*1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.

NOTE: Technical specifications are subject to change without notice.

11

LCD35Seriesmanual071904.p65

11

7/19/04, 7:24 AM

Page 13
Image 13
NEC LCD1735NXM, LCD1935NXM manual Monitor MultiSync LCD 1935NXM Specifications