Troubleshooting

No picture

¥The signal cable should be completely connected to the display card/computer.

¥The display card should be completely seated in its slot.

¥Check the Vacation Switch should be in the ON position.

¥Front Power Switch and computer power switch should be in the ON position.

¥Check to make sure that a supported mode has been selected on the display card or system being used. (Please consult display card or system manual to change graphics mode.)

¥Check the monitor and your display card with respect to compatibility and recommended settings.

¥Check the signal cable connector for bent or pushed-in pins.

¥Check the signal input, ÒDVI-DÓ, ÒDVI-IÓ or ÒD-SubÓ.

¥Ensure the DVI input mode is set to DIGITAL when the MAC digital output is connected to the DVI-I connector.

¥If the front LED is blinking amber, check the status of the OFF MODE (see page 11).

Power Button does not respond

¥Unplug the power cord of the monitor from the AC outlet to turn off and reset the monitor.

¥Check the Vacation Switch on the left side of the monitor.

Image Persistence

¥Image persistence is when a residual or ÒghostÓ image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitorsÕ image persistence is not permanent, but constant images being displayed for a long period of time should be avoided. To alleviate image persistence, turn off the monitor for as long as the previous image was displayed. For example, if an image was on the monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the image.

NOTE: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use.

Message “OUT OF RANGE” is displayed (screen is either blank or shows rough images only)

¥Image is displayed only roughly (pixels are missing) and OSD warning ÒOUT OF RANGEÓ is displayed: Either signal clock or resolution is too high. Choose one of the supported modes.

¥OSD warning ÒOUT OF RANGEÓ is displayed on a blank screen: Signal frequency is out of range. Choose one of the supported modes.

Image is unstable, unfocused or swimming is apparent

¥Signal cable should be completely attached to the computer.

¥Use the OSD Image Adjust controls to focus and adjust display by increasing or decreasing the fine total. When the display mode is changed, the OSD Image Adjust settings may need to be readjusted.

¥Check the monitor and your display card with respect to compatibility and recommended signal timings.

¥If your text is garbled, change the video mode to non-interlace and use 60Hz refresh rate.

LED on monitor is not lit (no green, blue or amber colour can be seen)

¥Power Switch should be in the ON position and power cord should be connected.

Picture is not as bright

¥Make sure ECO MODE, AUTO BRIGHTNESS, and MURACOMP is turned off.

¥If the brightness fluctuates make sure AUTO BRIGHTNESS is turned off.

Display image is not sized properly

¥Use the OSD Image Adjust controls to increase or decrease the Coarse total.

¥Check to make sure that a supported mode has been selected on the display card or system being used. (Please consult display card or system manual to change graphics mode.)

No Video

¥If no video is present on the screen, turn the Power button off and on again.

¥Make certain the computer is not in a power-saving mode (touch the keyboard or mouse).

Self Diagnosis

¥The LCD display is equipped with the ability to self diagnose abnormalities. When the LCD detects a problem, the LED on the front flashes in a pattern of long and short blinks, depending on the type of problem detected.

¥If the LED detects a problem, please refer service to qualified personnel.

English

English-17

Page 19
Image 19
NEC LCD1990SXi user manual Troubleshooting

LCD1990SXi specifications

The NEC LCD1990SXi is a remarkable 19-inch LCD monitor that combines advanced technology with user-centric features, making it an excellent choice for both professional and personal use. Launched as part of NEC's display lineup, the LCD1990SXi employs an impressive flat panel design that ensures a sleek and modern appearance while offering exceptional visual performance.

One of the standout features of this monitor is its high-resolution display. The LCD1990SXi has a native resolution of 1280 x 1024 pixels, providing clear and sharp images. This resolution, coupled with a 16.7 million colors supported through 8-bit color depth, ensures that users experience vibrant graphics and detailed images for various applications ranging from spreadsheets to graphic design.

In terms of brightness, the LCD1990SXi shines with a brightness of 250 cd/m², ensuring vivid visuals even in brightly lit environments. The contrast ratio of 600:1 enhances the differentiation between light and dark areas of the screen, allowing for deeper blacks and brighter whites, contributing to the overall picture quality.

The LCD1990SXi leverages advanced LCD technology to enhance the user experience. One example is the use of a rapid response time of 8 ms, which is essential for reducing motion blur, making it suitable for watching videos or playing action-packed games. Another innovation is the inclusion of a wide viewing angle of 160 degrees both horizontally and vertically, which enables multiple viewers to enjoy consistent color and clarity from different positions.

Ergonomics is another consideration in the LCD1990SXi's design. The monitor includes features such as tilt and swivel capabilities, allowing users to adjust the screen to their preferred viewing angle, consequently reducing eye strain during prolonged use. Additionally, the anti-glare coating on the screen minimizes reflections, further enhancing visibility.

Connectivity options are plentiful with the LCD1990SXi, featuring both VGA and DVI inputs, allowing compatibility with various devices. The monitor also includes built-in speakers, providing audio output without the need for external speakers, streamlining setup and minimizing desk clutter.

Overall, the NEC LCD1990SXi stands out as a feature-rich LCD monitor designed for versatility and performance. From its impressive image quality to its ergonomic design, this monitor is well-suited to meet the demands of both office environments and home use, reinforcing NEC's commitment to delivering high-quality display solutions.