| Screen Saver | Use the SCREEN SAVER to reduce the risk of image persistence. |
|
| MOTION (Default OFF): Screen image is reduced to 95% size and moves periodically in |
|
| 4 directions in order to reduce the risk of image retention. Screen image can be set to |
|
| move periodically in intervals from 10 to 900 seconds in 10 seconds increments. |
|
| GAMMA (Default OFF): When OFF, the GAMMA selection that is used by the display is |
|
| the same as what is selected in Tag5 (page 20). When ON is selected, the GAMMA curve |
|
| is narrow, reducing the contrast and cutting down the risk of image retention. |
|
| NOTE: SCREEN SAVER does not function when the TILE MATRIX function is enabled. |
|
| When the SCREEN SAVER is on and the monitor is set to the recommended resolution, |
|
| the screen image will be reduced to 95% and appear slightly less sharp than normal. |
|
| Gamma screen saver is not available when using the PROGRAMMABLE mode for |
|
| GAMMA curve. |
|
|
|
| Input Setting | Video Band Width (Analog input only): It is used when the unnecessary noise from |
|
| computer appears on a screen. It is strong ineffective, so that a number becomes small. |
|
| Press “Left” or “Right” to select. |
|
| Sync Threshold (Analog input only): Adjusts the slice level of a synchronization signal. |
|
| Press “SELECT” to move the adjustment menu. Adjusts the sensitivity of the separate or |
|
| composite input signals. |
|
| Try this option if the FINE adjustment does not successfully eliminate the noise. |
|
| SOG Threshold (Analog input only): Adjusts the sensitivity of the Sync On Green input |
|
| signals. Adjusts the slice level when separating synchronization from sync On Green |
|
| signal input. Press “Left” or “Right” to select. |
|
| Edge Lock: Operating your monitor at a |
|
| appear darker than normal or have colour distortion. Use of the Edge Lock control will |
|
| adjust images to their normal state. |
|
|
|
TagA | Tile Matrix | Tile Matrix demonstrates multiple screens. This feature provides a single large screen |
|
| using up to 25 monitors. It will be able to divide up to 5 each H and V. |
|
| This requires you to feed the PC output into each of the monitors through a distributor. |
|
| ENABLE: Select “ON”, the monitor will expand the selected position. |
|
| H MONITOR: Select number of horizontal divide. |
|
| V MONITOR: Select number of vertical divide. |
|
| MONITOR No: Select a position to expand the screen. |
|
| TILE COMP: Works in tandem with Tile Matrix to compensate for the width of the tile |
|
| bezels in order to accurately display the image. |
|
| Tile Comp with 4 monitors (black area shows monitor frames): |
monitor1 | monitor2 | monitor1 | monitor2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| monitor3 |
|
|
| monitor4 |
|
|
| monitor3 |
|
|
| monitor4 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Tile Comp OFF |
|
| Tile Comp ON |
|
|
|
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TagB | Date & Time | Adjusts the current date and time for internal clock. You should set this function when you | |||||||||||||||
|
| use “SCHEDULE”. |
|
|
|
|
|
|
|
|
|
|
| ||||
|
| Daylight Saving: For those timezones where Daylight Saving Time (Summertime) | |||||||||||||||
|
| is observed. |
|
|
|
|
|
|
|
|
|
|
| ||||
English
