| Video Detect | Selects the method of video detection when more than one computer is connected. |
|
|
|
| Press “Left” or “Right” to select. |
| English |
|
| FIRST: The video input has to be switched to “FIRST” mode. When current video input |
| |
|
|
|
| |
|
| signal is not present, then the monitor searches for a video signal from the other video |
|
|
|
| input port. If the video signal is present in the other port, then the monitor switches the |
|
|
|
| video source input port to the new found video source automatically. The monitor will not |
|
|
|
| look for other video signals while the current video source is present. |
|
|
|
| LAST: The video input has to be switched to the “LAST” mode. When the monitor is |
|
|
|
| displaying a signal from the current source and a new secondary source is supplied to the |
|
|
|
| monitor, then the monitor will automatically switch to the new video source. When current |
|
|
|
| video input signal is not present, then the monitor searches for a video signal from the |
|
|
|
| other video input port. If the video signal is present in the other port, then the monitor |
|
|
|
| switches the video source input port to the new found video source automatically. |
|
|
|
| NONE: The Monitor will not search the other video input port unless the monitor is |
|
|
|
| turned on. |
|
|
|
|
|
|
|
| Off Timer | Monitor will automatically turn off after the preset time period from power on with the |
|
|
|
| ON/OFF function. When you select “ON”, press “SELECT” and “Left” or “Right” to adjust. |
|
|
|
| Before powering off, a message will appear on the screen asking the user if they want to |
|
|
|
| delay the turn off time by 60 minutes. Press any OSM button to delay the turn off time. |
|
|
|
|
|
|
|
| IPM (Intelligent Power | The Intelligent Power Manager allows the monitor to enter into a power saving mode after |
|
|
| Manager) | a period of inactivity. The IPM has three settings. |
|
|
|
| OFF: Monitor does not go into power save mode when the input signal is lost. |
|
|
|
| STANDARD: Monitor enters power save mode automatically when the input signal is lost. |
|
|
|
| OPTION: Monitor enters power save mode automatically when the amount of surrounding |
|
|
|
| light goes below the level that is determined by the user. |
|
|
|
|
|
|
|
| IPM Setting | Adjusts the luminance value for IPM. |
|
|
|
|
|
|
|
| Over Drive | Turns the OVER DRIVE function on or off. Over Drive may reduce blurring that occurs in |
|
|
|
| some moving images. When Over Drive is on, response time is improved. When the |
|
|
|
| IMAGE ROTATION function is used, the OVER DRIVE function will be turned off |
|
|
|
| automatically. |
|
|
|
|
|
|
|
| Side Border Color | Adjusts the side black bars colour between black and white. For wide aspect monitors. |
|
|
|
|
|
|
|
| LED Brightness | Controls the brightness of the LED on the monitor. |
|
|
|
|
|
|
|
| LED Color | The LED on the front can be blue or green. |
|
|
|
|
|
|
|
| ColorComp | This function electronically compensates for the slight variations in the white uniformity |
|
|
|
| level as well as for deviations in colour that may occur throughout the display area of the |
|
|
|
| screen. These variations are characteristic of LCD panel technology. This function |
|
|
|
| improves the colour and evens out the luminance uniformity of the display. |
|
|
|
| NOTE: Using the COLORCOMP feature does reduce the overall peak luminance of the |
|
|
|
| display. If greater luminance is desired over the uniform performance of the display, then |
|
|
|
| COLORCOMP should be turned off. |
|
|
|
|
|
|
|
| ColorComp Level | Select the level for ColorComp adjustments. |
|
|
|
|
|
|
|
Tag8 | Language | OSM control menus are available in eight languages. Press “Left” or “Right” to select. |
|
|
|
|
|
|
|
| OSM H. Position | You can choose where you would like the OSM control image to appear on your screen. |
|
|
|
| Selecting OSM Location allows you to manually adjust the position of the OSM control |
|
|
|
| menu left or right. |
|
|
|
|
|
|
|
| OSM V. Position | You can choose where you would like the OSM control image to appear on your screen. |
|
|
|
| Selecting OSM Location allows you to manually adjust the position of the OSM control |
|
|
|
| menu up or down. |
|
|
|
|
|
|
|
| OSM Turn off | The OSM control menu will stay on as long as it is use. You can select how long the |
|
|
|
| monitor waits after the last touch of a button to shut off the OSM control menu. |
|
|
|
| The preset choices are |
|
|
|
|
|
|
|