NEC LCD2090UXI user manual English-24

TagC	Schedule	Programs the monitor’s working schedule. Schedule the power on and power off with hour
		and a day of the week. Also sets the input port. This OSM can’t remove except EXIT.
		Using the “SCHEDULE” function allows you to set up to seven different scheduled time
		intervals when the LCD Monitor will be activated.
		You can select the time the monitor turns on and turns off, the day of week the monitor is
		activated, and which input source the monitor will use for each scheduled activation
		period. A check mark in the box next to the number of the schedule indicates that the
		selected schedule is in effect.
		To select which schedule to set, use the up/down arrows to move the cursor vertically
		under the number (1 to 7) of the schedule.
		Use the “Down” or “Up” buttons to move the cursor horizontally within the particular
		schedule. The “SELECT” button is used to make a selection.
		If you create a schedule but do not want to use a power on time, select “--” in the “ON”
		time slot.
		If you do not want to use a power off time select “--” in the OFF time slot.
		If there is no input selected (“-----” showing in the input spot) the input from the previous
		schedule will be used.
		The selection of EVERY DAY within a schedule takes priority over other schedules that are
		set up to operate weekly.
		Schedules are numbered 1-7. If two schedules are programmed for the same time, then
		the highest numbered schedule has priority. For example schedule #7 will take priority
		over schedule #5.
		When schedules are overlapping, scheduled Power ON time has priority over scheduled
		Power OFF time.
		When the “OFF TIMER” is set, the “SCHEDULE” function is disabled.
		Before powering off, a message will appear on the screen asking the user if they want to
		delay the turn off time by 60 minutes. Press any OSM button to delay the turn off time.
TagD	Eco Mode Information	Displays the estimated power saving information in watt-hours.
TagE	Information	Provides information about the current display resolution Technical data, including the
		preset timing currently being used and the horizontal and vertical frequencies is also
		displayed.

English-24