Audio, Schedule, English-22

CUSTOM ZOOM		ÒCUSTOM ZOOMÓ will be selected when you select ÒCUSTOMÓ on the screen ÒZOOMÓ mode.

	ZOOM	Expands the horizontal and the vertical size simultaneously.

	H ZOOM	Expands the horizontal size only.

	V ZOOM	Expands the vertical size only.

	H POS	Moves to the right with + button. Moves to the left with - button.

	V POS	Moves up with + button. Moves down with - button.

H RESOLUTION		Adjusts the horizontal size of the image.
INPUT RGB1, 2, 3 only		Press + button to expand, and press - button to narrow the width of the image on the screen.

V RESOLUTION		Adjusts the vertical size of the image.
INPUT RGB1, 2, 3 only		Press + button to expand, and press - button to narrow the width of the image on the screen.

INPUT RESOLUTION		Selects to decision of input signal timings 1024x768, 1280x768 and 1360x768, if there is a detection problem.
INPUT RGB2, 3 only		If no problem is detected, the only available option will be ÒAUTOÓ.

ADJUST RESET		Resets the all settings within the ADJUST menu back to factory setting.

AUDIO

BALANCE

Adjust the balance of L/R volume.

TREBLE

To accentuate or reduce the high frequency sound. Press + to increase, press - to decrease.

BASS

To accentuate or reduce the low frequency sound. Press + to increase, press - to decrease.

AUDIO RESET

Resets the all settings within the AUDIO menu back to factory setting.

OFF TIMER	Sets the monitor to power off after a length of time.
	A time between 1 to 24 hours is available.

SCHEDULE	Creates a working schedule for the monitor to use. This OSD canÕt remove except EXIT.
	(See ÒNOTE 1Ó on page 25 for further information).

DATE AND TIME	Sets the date, time, and daylight saving region.
	Setting item: YEAR/MONTH/DAY/HOUR/MINUTE/DAYLIGHT SAVING TIME
	Date & time must be set in order for the ÒSCHEDULEÓ function to operate.

SCHEDULE RESET	Resets the all settings within the SCHEDULE menu back to factory setting except DATE AND TIME setting.

PIP
PIP SIZE	Selects the size of sub-picture used in ÒPicture-in-PictureÓ (PIP) mode.
	ÒLARGEÓ, ÒMIDDLEÓ and ÒSMALLÓ are available.

PIP AUDIO	Selects the sound source in PIP mode.

PIP RESET	Resets the all settings within the PIP menu back to factory setting.

OSD
LANGUAGE	Selects the language used by the OSD from seven languages.
	ENGLISH/DEUTSCH/FRAN‚AIS/ESPA„OL/ITALIANO/SVENSKA/

OSD TURN OFF	Turns off the OSD after a period of inactivity. The preset choices are 5 - 120 seconds.

OSD H-POSITION	Adjusts the horizontal position of the OSD menu.

OSD V-POSITION	Adjusts the vertical position of the OSD menu.

INFORMATION OSD	Selects the information OSD displays or not. The information OSD will display when input signal or source
	change or warning message like as no-signal or out-of range.
	A time between 1 to 10 seconds is available.

MONITOR INFORMATION

Indicates the model and serial number of your monitor.

OSD RESET

Resets the all settings within the OSD menu back to factory setting.