MULTI DISPLAY
IR CONTROL | Selects the infrared wireless remote controller mode. | |
|
| The item in this menu will become effective by pressing ÒSETÓ button on the selected item. |
|
|
|
| NORMAL | The monitor will be controlled normally by wireless remote controller. |
|
|
|
| LOCK | Disables the monitor control by infrared wireless remote controller. |
|
| Keep pressing ÒDISPLAYÓ button during 5 sec or more, this setting will return to ÒNORMALÓ. |
|
|
|
TILE MATRIX | Allows one image to be expanded and displayed over multiple screens (up to 16) through a distribution | |
|
| amplifier. When screen size is ÒRealÓ, this function does not operate. |
|
|
|
| H MONITORS | Selects number of monitors arranged vertically. |
|
|
|
| V MONITORS | Selects number of monitors arranged horizontally. |
|
|
|
| POSITION | Selects which section of the tiled image to be displayed on the monitor. |
|
|
|
| TILE COMP | Turns the TILE COMP feature on. |
|
|
|
| ENABLE | Enables the Tile Matrix. |
|
| PIP and STILL will be disabled when ÒTILE MATRIXÓ is activated. |
|
|
|
POWER ON DELAY | Adjusts the delay time between being in ÒstandbyÓ mode and entering Òpower onÓ mode. | |
|
| ÒPOWER ON DELAYÓ time is selectable from OFF, 2, 4, 6, 8, 10, 20, 30, 40 and 50 sec. |
|
|
|
MULTIDISPLAY RESET | Resets the all settings within the MULTI DISPLAY menu back to factory setting. | |
|
| |
DISPLAY PROTECTION | ||
POWER SAVE | Sets how long the monitor waits to go into power save mode after a lost signal. | |
|
| Note: When connecting DVI, video card might not stop sending digital data even if image has disappeared. |
|
| In this case the monitor does not get to power management mode. |
|
|
|
| RGB | Selecting ÒONÓ, the monitor will go to power management mode when RGB1, 2, 3 sync is lost. |
|
|
|
| VIDEO | Selecting ÒONÓ, the monitor will go to power management mode after about 10 minutes when DVD/HD and |
|
| VIDEO input signal is lost. |
|
|
|
HEAT STATUS | Information of status for COOLING FAN, BRIGHTNESS and TEMPERATURE. COOLING FAN runs when | |
|
| inside temperature is over a guaranteed limit. In this case warning is displayed on the screen. |
|
|
|
SCREEN SAVER | Use the SCREEN SAVER function to reduce the risk of Image Persistence. See note 2 for this functions. | |
|
|
|
| GAMMA | The display gamma is changed and fixed when ÒONÓ is selected. |
|
|
|
| COOLING FAN | The built in cooling fan is always on when set ÒONÓ. |
|
|
|
| BRIGHTNESS | The brightness is decreased when ÒONÓ is selected. |
|
|
|
| MOTION | Image is slightly expanded and moves 4 directions (UP, DOWN, RIGHT, LEFT) periodically (Need setting the |
|
| time for movement). |
|
| Movement area is approximately +/- 10 mm from original position; |
|
| Please locate the important information such as text within 90% area of screen image. |
|
| PIP and STILL will be disabled when ÒMOTIONÓ is active. |
|
|
|
SIDE BORDER COLOR | Selects the side black bar color white when 4:3 image displayed, you can select OFF, 50 and 100. | |
|
|
|
DISPLAY PROTECTION | Resets the all settings within the DISPLAY PROTECTION menu back to factory setting. | |
RESET |
| |
|
|
|
