NEC LCD4615 Controlling the LCD monitor via RS-232C Remote Control, Connection, English-26

Controlling the LCD monitor via RS-232C Remote Control

This LCD monitor can be controlled by connecting a personal computer with a RS-232C terminal.

Functions that can be controlled by a personal computer are:

¥Power ON or OFF

¥Switching between input signals

Connection MultiSync

LCD Monitor + PC

PC (Out)

RS-232C (IN)

RS-232C Cable

NOTE: If your PC (IBM or IBM compatible) is equipped only with a 25-pin serial port connector, a 25-pin serial port adapter is required. Contact your dealer for details.

*In order to function, the RS-232C OUT terminal can only be connected to another monitor of the same model. Do not connect to other types of equipment.

To control monitor or multiple monitors that are daisy-chained together please use the control command. Instructions for the control command can be found on the CD included with the display. The file is called ÒExternal_control_****.pdfÓ.

1) Interface

PROTOCOL	RS-232C
BAUD RATE	9600 [bps]
DATA LENGTH	8 [bits]
PARITY BIT	NONE
STOP BIT	1 [bit]
FLOW CONTROL	NONE

This LCD monitor uses RXD, TXD and GND lines for RS-232C control.

2)Control command diagram

Please see file ÒExternal_Control_****.pdfÓ on the CD-ROM.

English-26