WARNING
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK • DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol warns user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any part inside this unit.
This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included. Therefore, it should be read carefully in order to avoid any problems.
Declaration of the Manufacturer
We hereby certify that the colour monitors AccuSync LCD73VM (L175GZ)/AccuSync LCD93VM (L195GY) are in compliance with
Council Directive 73/23/EEC: and marked with
– EN |
| |
Council Directive 89/336/EEC: |
| |
– EN 55022 |
| |
– EN | NEC Display Solutions, Ltd. | |
– EN | ||
– EN 55024 | ||
| ||
| Tokyo |
English
Contents
| Audio |
|
|
User’s Manual | Cable |
| |
|
| ||
Power Cord | Base Stand Cable Holder | AccuSync LCD monitor |
Captive type (Video signal
cable is connected)
Your new NEC AccuSync LCD monitor box* should contain the following:
•AccuSync LCD monitor with tilt base
•Audio Cable
•Power Cord
•User’s Manual
•
•Base Stand
•Cable Holder
*Remember to save your original box and packing material to transport or ship the monitor.
Quick Start
Stand
Locking Tabs
Cable Holder
Base
Figure S.1
Figure A.1 Macintosh Cable | Figure A.2 | |
| Adapter (not included) |
|
|
| AUDIO INPUT |
|
| |
|
|
|
Cable holder
Connect to Computer audio output
Figure B.1
To attach the Base to the LCD Stand:
1.Insert the front of the LCD stand into the holes in the front of the Base (Figure S.1).
2.Attach the Base to the Stand. The locking tab on the Base should fit into the hole on the back of the Stand (Figure S.1).
To attach the Cable Holder:
1.Attach the Cable Holder on to the Base. Insert the hooks on the Cable Holder into the holes at the back of the Stand and slide the Cable Holder downward into place (Figure S.1).
NOTE: Please confirm that the tabs are completely secure.
To attach the AccuSync LCD monitor to your system, follow these instructions:
1.Turn off the power to your computer.
2.For the PC with Analog output: Connect the
For the Mac: Connect the MultiSync Macintosh cable adapter (not included) to the computer. Attach the
NOTE: Some Macintosh systems do not require a Macintosh cable adapter.
3.Connect the Audio Cable to the appropriate connector on the back of the monitor (Figure B.1). Connect the Headphone (not included) to the appropriate connector at the front of the monitor (Figure C.1).
4.Connect the power cord to the power outlet. Place the Video Signal Cable and power cord to the Cable holder (Figure B.1).
01_English | 1 | 16/5/06, 9:11 |