Wiring Diagram

Document Camera

VCR, DVD Player or

LaserDisc Player

To video, S-video, and audio inputs on the projector.

VIDEO S-VIDEO

PC CONTROL

RGB

AUDIO

RGB Signal cable (supplied)

To mini D-Sub 15-pin connector on the pro- jector. It is recommended that you use a commercially available distribution amplifier if connecting a signal cable longer than the supplied one.

Optional Component V cable

DVD Player (with component output)

Macintosh or Compatibles

IBM VGA or Compatibles

(Desktop type or notebook type)

(Desktop type or notebook type)

NOTE: When using with a notebook PC, be sure to connect between the projector and the notebook PC before turning on the power to the notebook PC. In most cases signal cannot be output from RGB output unless the notebook PC is turned on after connecting with the projector.

NOTE:

*If the screen goes blank while using your remote control, it may be the result of the computer’s screen-saver or power management software.

*If you accidentally hit the POWER button on the remote control, wait 60 seconds and then press the POWER button again to resume.

NOTE: If using video, S-video, or audio cables, the cables should be 3 m (9.8 feet) or shorter.

E – 18

Page 18
Image 18
NEC LT154, LT155 user manual Wiring Diagram, RGB Signal cable supplied