NEC LT155, LT154 user manual Connecting Your PC, To connect to a PC, simply

Connecting Your PC

IBM VGA or Compatibles (Notebook type)

Audio cable (not supplied)

IBM VGA or Compatibles (Desktop type)

Connecting your PC to your MultiSync LT155 (XGA)/ LT154 (XGA) projector will enable you to project your computer’s screen image for an impressive presentation.

To connect to a PC, simply:

1.Turn off the power to your projector and computer.

2.Use the supplied signal cable to connect your PC to the projector.

3.Turn on the projector and the computer.

4.If the projector goes blank after a period of inactivity, it may be caused by a screen saver installed on the computer you’ve connected to the projector.

L

E

CCARD

	USB
AC IN	PC	CO	NTROL
				V
				IDEO

	S-
	VIDEO
		RGB	RGB
DEO		AUDIO		INPUT
	S-
	VIDEO				AUDIO
			RGB

AUDIO

RGB signal cable (supplied)

To mini D-Sub 15-pin connector on the projector. It is recommended that you use a commercially available distribution amplifier if connecting a signal cable longer than the supplied one.

E – 19