Noise Reduction (not available for RGB and PC Card Viewer)
You can select three levels video noise reduction.
NOTE: The lower the Noise Reduction level, the better the image quality by way of higher video bandwidth.
Color Matrix (available for component video signal only)
First select an appropriate color matrix to fit your component signal for HDTV or SDTV. Then select an appropriate matrix type from
White Balance (not available for PC Card Viewer)
This allows you to adjust the white balance. Brightness for each color (RGB)is used to adjust the black level of the screen;
Contrast for each color (RGB)to adjust the white level of the screen. First use the ▲ or ▼ buttons to select R, G, or B for the brightness and the contrast. Next use the or buttons to adjust the level.
Position/ Clock (when Auto Adjust is off)
This allows you to manually adjust the image horizontally and verti- cally, and adjust Clock and Phase.
Horizontal/Vertical Position
.................... Adjusts the image location horizontally and vertically using
the and buttons.
This adjustment is made automatically when the Auto Adjust is turned on.
Clock ............ Use this item to fine tune the computer image or to remove
any vertical banding that might appear. This function adjusts the clock frequencies that eliminate the horizontal banding in the image.
Press the and buttons until the banding disappears. This adjustment may be necessary when you connect your computer for the first time. This adjustment is made auto- matically when the Auto Adjust is turned on.
Phase ........... Use this item to adjust the clock phase or to reduce video
noise, dot interference or cross talk. (This is evident when part of your image appears to be shimmering.) Use the and buttons to adjust the image.
See "Auto Adjust (RGB Only) on page
Use "Phase" only after the "Clock" is complete.
This adjustment is made automatically when the Auto Adjust is turned on.
Resolution (when Auto Adjust is off)
This allows you to activate or deactivate the Advanced AccuBlend fea- ture.
Auto | Turns on the Advanced AccuBlend feature. The projector au- |
| tomatically reduces or enlarges the current image to fit the |
| full screen. |
Native | Turns off the Advanced AccuBlend feature. The projector dis- |
| plays the current image in its true resolution. |
See "Auto Adjust (RGB Only) on page
NOTE: While you are displaying an image with higher resolution than the projector's native resolution, even when you are in the Native mode, the image is displayed full screen using the Advanced AccuBlend feature.
Video Filter (when Auto Adjust is off)
This function reduces video noise.
On | The |
Off | The filter is removed. |
Screen adjustments are possible even when the filter is On.
E – 35
