100 mm

Flexible Arm Installation

This LCD monitor is designed for use with a flexible arm.

To prepare the monitor for alternate mounting purposes:

¥Refer to instructions included with the flexible arm for detailed instructions.

¥To fulfill the safety requirements the monitor must be mounted to an arm, which guaranties the necessary stability under consideration of the weight of the monitor.

Remove Monitor Stand

1.Remove the cable cover.

2.Disconnect all cables.

3.Place hands on each side of the monitor and lift up to the highest position.

4.Make sure to rotate the screen 90¡ counter clockwise to the landscape position.

5.Place monitor face down on a non-abrasive surface. Be sure to not apply any stress or pressure to the front sensor. To avoid this, lay the display face down on a desk or table with the front sensor situated off the edge (Figure S.1).

6. Remove the 4 screws connecting the monitor to the stand (Figure S.2). Reverse process to reattach stand.

NOTE: Handle with care when removing monitor stand and avoid pinching your fingers.

English

Front sensor

Figure S.1

Figure S.2

Mount Flexible arm

1. Change the 4 screws that were removed from the stand removal to attach the flexible arm to the monitor (Figure F.1).

Caution: ¥ When mounting, use ONLY the screws (4 pcs) that were removed from the stand to avoid damage to the monitor or stand.

¥ The monitor should only be used with an approved arm (e.g. GS mark).

¥When using mounting accessories (e.g. VESA (100 x 100), use M4 size screws (Length: bracket thickness + 10mm). Recommended Fasten Force: 98 - 137N¥cm

¥To avoid blocking vent, keep adequate space above and

behind the monitor when using with flexible arm.

100 mm

Weight of LCD assembly:

7.5 kg (MD212MC/MD213MC)

7.7 kg (MD213MG)

Figure F.1

English-9

Page 11
Image 11
NEC MD213MC manual Flexible Arm Installation, Remove Monitor Stand, Mount Flexible arm, English-9

MD213MC specifications

The NEC MD213MC is a robust medical-grade display designed to meet the rigorous demands of healthcare environments. With a resolution of 2 megapixels, this monitor offers exceptional clarity and detail, essential for effective diagnosis and patient care. It features an active matrix TFT LCD panel that ensures superb image quality and consistency across various lighting conditions.

One of the standout features of the MD213MC is its high brightness level, which significantly enhances visibility and allows for clear viewing of images even in brightly lit examination rooms. The monitor supports a wide color gamut, ensuring that colors are reproduced accurately and that the display can handle diverse imaging applications.

The display is equipped with advanced medical imaging technologies, including a DICOM Part 14 compliance for grayscale images. This feature is crucial as it ensures that medical images, such as X-rays and MRIs, are displayed with the necessary contrast and brightness, assisting healthcare professionals in making informed decisions based on precise image analysis.

Another significant characteristic of the MD213MC is its ergonomic design. It includes a lightweight and slim profile, which makes it easy to mount in various clinical settings. The monitor can be adjusted for height, tilt, and swivel, enhancing the comfort of users during long hours of operation.

The MD213MC also incorporates an automated calibration feature that ensures consistent image quality over time. This is particularly important in medical settings, where even minor discrepancies in image display can lead to varying diagnostics.

Connectivity is another strong aspect of the NEC MD213MC. The monitor offers multiple input options, including DisplayPort and DVI, making it compatible with a wide range of medical imaging equipment. Additionally, the monitor includes USB ports for easy connection to peripheral devices, enhancing its versatility.

In terms of compliance, the NEC MD213MC adheres to stringent medical safety and performance standards, ensuring that it functions reliably in critical environments. Its combination of high-resolution imaging, ergonomic design, and advanced display technologies makes it an ideal choice for hospitals and clinics looking to enhance their imaging capabilities for improved patient outcomes. Overall, the MD213MC represents a significant advancement in medical display technology, providing healthcare professionals with the tools necessary for effective diagnosis and treatment.