Quick Start

To attach the LCD monitor to your system, follow these instructions:

NOTE: Make sure to read ÒRecommended UseÓ before installation.

In order to display the maximum resolution, a display controller is required which can output a resolution of 1200 x 1600 (in portrait mode) or 1600 x 1200 (in landscape mode) for MD212MC and 1536 x 2048 (in portrait mode) or 2048 x 1536 (in landscape mode) for MD213MC/MD213MG.

We recommend using a digital input.

1.Turn off the power to your computer.

2.Connect the DVI signal cable to the connector of the display card in your system (Figure A.1). Tighten all screws.

We recommend using a digital input. If you use an analog input, connect the 15-pin mini D-SUB to DVI-A signal cable (not included) or D-SUB to D-SUB cable (not included) (only for MD212MC) to the connector of the display card in your system (Figure A.2).

Figure A.1

Figure A.2

3.Rotate the screen to portrait mode. Refer to the ÒScreen rotationÓ section in this manual.

4.Place hands on each side of the monitor to tilt the LCD panel to a 30û angle and lift up to the highest position (Figure C.1).

5.Connect all cables to the appropriate connectors (Figure C.1).

NOTE: Incorrect cable connections may result in irregular operation, damage display quality/components of LCD module and/or shorten the moduleÕs life.

6.To keep the cables neatly organized, place them into the cable management system that is built into the stand. Place the power cable into the specific hooks as indicated (Figure C.2).

Place the DVI cable and the 15-pin mini D-Sub to DVI-A cable (not included) into the hooks as indicated (Figure C.3).

When using the monitor in Landscape mode, place the DVI cable and the 15-pin mini D-Sub to DVI-A cable (not included) into the hooks as indicated (Figure C.4).

7.Make sure all cables are resting flat against the stand (Figure C.3).

Please check Tilt, Raise and Lower monitor screen and screen rotation when you manage cables.

30û Tilt

Power cord

D-SUB (Only for MD212MC)

DVI-I

DVI-D

Figure C.1

Figure C.2

English-6

Page 7 Page 9
Page 8
Image 8
NEC MD213MC manual Quick Start, English-6
Page 7 Page 9

MD213MC specifications

The NEC MD213MC is a robust medical-grade display designed to meet the rigorous demands of healthcare environments. With a resolution of 2 megapixels, this monitor offers exceptional clarity and detail, essential for effective diagnosis and patient care. It features an active matrix TFT LCD panel that ensures superb image quality and consistency across various lighting conditions.

One of the standout features of the MD213MC is its high brightness level, which significantly enhances visibility and allows for clear viewing of images even in brightly lit examination rooms. The monitor supports a wide color gamut, ensuring that colors are reproduced accurately and that the display can handle diverse imaging applications.

The display is equipped with advanced medical imaging technologies, including a DICOM Part 14 compliance for grayscale images. This feature is crucial as it ensures that medical images, such as X-rays and MRIs, are displayed with the necessary contrast and brightness, assisting healthcare professionals in making informed decisions based on precise image analysis.

Another significant characteristic of the MD213MC is its ergonomic design. It includes a lightweight and slim profile, which makes it easy to mount in various clinical settings. The monitor can be adjusted for height, tilt, and swivel, enhancing the comfort of users during long hours of operation.

The MD213MC also incorporates an automated calibration feature that ensures consistent image quality over time. This is particularly important in medical settings, where even minor discrepancies in image display can lead to varying diagnostics.

Connectivity is another strong aspect of the NEC MD213MC. The monitor offers multiple input options, including DisplayPort and DVI, making it compatible with a wide range of medical imaging equipment. Additionally, the monitor includes USB ports for easy connection to peripheral devices, enhancing its versatility.

In terms of compliance, the NEC MD213MC adheres to stringent medical safety and performance standards, ensuring that it functions reliably in critical environments. Its combination of high-resolution imaging, ergonomic design, and advanced display technologies makes it an ideal choice for hospitals and clinics looking to enhance their imaging capabilities for improved patient outcomes. Overall, the MD213MC represents a significant advancement in medical display technology, providing healthcare professionals with the tools necessary for effective diagnosis and treatment.
Top Page Image Contents