Important Information

Safety Cautions

Precautions

Please read this manual carefully before using your NEC MT1065/ MT1060 Projector and keep the manual handy for future reference.Your serial number is located on the right side of your projector. Record it here:

CAUTION

To turn off main power, be sure to remove the plug from power outlet.

The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible.

CAUTION

TO PREVENT SHOCK, DO NOT OPEN THE CABINET. NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED NEC SERVICE PER- SONNEL.

This symbol warns the user that uninsulated voltage within the unit may be sufficient to cause electrical shock. Therefore, it is dangerous to make any kind of contact with any part inside of the unit.

This symbol alerts the user that important information con- cerning the operation and maintenance of this unit has been provided.

The information should be read carefully to avoid problems.

WARNING

TO PREVENT FIRE OR SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

DO NOT USE THIS UNIT’S GROUNDED PLUG WITH AN EXTEN- SION CORD OR IN AN OUTLET UNLESS ALL THREE PRONGS CAN BE FULLY INSERTED.

DO NOT OPENTHE CABINET.THERE ARE HIGH-VOLTAGE COM- PONENTS INSIDE. ALL SERVICING MUST BE DONE BY QUALI- FIED NEC SERVICE PERSONNEL.

DOC Compliance Notice

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Acoustic Noise Information Ordinance-3. GSGV:

The sound pressure level is less than 70 dB (A) according to ISO 3744 or ISO 7779.

This label is on the side of the remote control.

CAUTION

Do not look into the laser pointer while it is on and do not point the laser beam at a person. Serious injury could re- sult.

RF Interference

WARNING

The Federal Communications Commission does not allow any modifications or changes to the unit EXCEPT those specified by NEC Soluctions (America), Inc. in this manual. Failure to com- ply with this government regulation could void your right to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guar- antee that interference will not occur in a particular installa- tion. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio / TV technician for help.

In UK, a BS approved power cable with moulded plug has a Black (five Amps) fuse installed for use with this equipment. If a power cable is not supplied with this equipment please contact your supplier.

Important Safeguards

These safety instructions are to ensure the long life of your projector and to prevent fire and shock. Please read them carefully and heed all warnings.

Installation

1.For best results, use your projector in a darkened room.

2.Place the projector on a flat, level surface in a dry area away from dust and moisture.

To avoid premature lamp failure, do not tilt the front of the projector up or down by more than 15° from level.

3.Do not place your projector in direct sunlight, near heaters or heat radiating appliances.

4.Exposure to direct sunlight, smoke or steam can harm internal com- ponents.

5.Handle your projector carefully. Dropping or jarring can damage in- ternal components.

6.Do not place heavy objects on top of the projector.

7.If you wish to have the projector installed on the ceiling:

a.Do not attempt to install the projector yourself.

b.The projector must be installed by qualified technicians in order to ensure proper operation and reduce the risk of bodily injury.

c.In addition, the ceiling must be strong enough to support the projector and the installation must be in accordance with any local building codes.

d.Please consult your dealer for more information.

E-2

Page 2
Image 2
NEC MT1065/MT1060 user manual Safety Cautions

MT1065/MT1060 specifications

The NEC MT1065 and MT1060 are advanced portable projectors that exemplify high-quality performance for various professional settings. These models, part of NEC’s reputation for reliable display solutions, cater to a wide range of applications, from corporate presentations to educational environments. Both projectors share several key features and technologies that make them standout choices in the market.

One of the main characteristics of the MT1065 and MT1060 is their high brightness level. The MT1065 delivers an impressive 5,500 ANSI lumens, while the MT1060 offers a slightly lower luminous output at 4,500 ANSI lumens. This high brightness ensures that presentations remain clear and visible, even in well-lit rooms. The projectors feature a high contrast ratio that enhances image quality by producing deeper blacks and brilliant whites.

In terms of imaging technology, both models utilize DLP (Digital Light Processing) technology, which is renowned for its sharpness and color accuracy. DLP technology contributes to vibrant images with smooth transitions and little to no motion blur, making these projectors suitable for displaying video content, graphics, or text-heavy presentations.

Portability is another vital aspect of the NEC MT1065 and MT1060. Weighing just over 6.5 lbs each, these projectors are designed for ease of transport, making them ideal for business professionals who frequently move between different locations. Their compact size does not compromise their durability, as they are constructed with robust materials suitable for various environments.

Both models come equipped with multiple connectivity options, including HDMI, VGA, and USB ports. This versatility allows users to connect a wide range of devices, from laptops and tablets to USB thumb drives, providing flexibility in presentations. Furthermore, the projectors also support a variety of display resolutions, up to Full HD 1080p, ensuring compatibility with modern multimedia content.

User-friendliness is emphasized through features such as automatic keystone correction and an intuitive user interface, simplifying setup and operation. The projectors also incorporate energy-efficient technologies, reducing power consumption and contributing to lower operational costs.

In summary, the NEC MT1065 and MT1060 projectors are equipped with high brightness levels, advanced DLP imaging technology, and user-friendly features, making them excellent choices for professionals seeking reliable, high-performance portable projectors. With their solid build quality and versatility, they effectively meet the demands of dynamic presentation environments.