NEC MT1065/MT1060 Convenient Features, Using the Remote Mouse Function, E-24, Not lit, Lit red

CONVENIENT FEATURES

Using the Remote Mouse Function

The built-in remote mouse function enables you to operate your computer's mouse functions from the remote control (Computer mode). It is a great convenience for clicking through your computer-generated presentations.To return to the projector operation mode (Projector mode), press the PJ button (lit red).

Connecting to your computer for the remote mouse function

If you wish to use the remote mouse function, use the supplied USB cable to connect the USB port (PC) of the projector and the USB port (type A) of your computer.

NOTE: Depending on the type of connection or OS installed on your computer, you may have to restart your computer or change you computer settings.

When using the USB Port

For PC, the mouse receiver function can only be used with a Windows 98, Windows ME, Windows XP or Windows 2000 operating system.

USB port (PC)

USB port (Type A)

NOTE: Wait at least 5 seconds after disconnecting the USB cable before recon- necting it and vice versa. The computer may not identify the built-in mouse re- ceiver if it is repeatedly connected and disconnected in rapid intervals.

Switching operation mode between computer and projector

The three shaded buttons shown on the drawing work as a computer mouse in the Computer mode. In the Computer mode the PJ button is not lit.

Works as a mouse for your computer.

OFF	ON
	POWER
VIDEO	RGB VIEWER
AUTO ADJ.	LASER

Works as a right-click button for your computer.

Works as the SELECT button on the projector.

OFF	ON
	POWER
VIDEO	RGB VIEWER
AUTO ADJ.	LASER

Works as the CANCEL button on the projector.

Works as a left-click button for your com- puter.

Not lit

ASPECT FREEZE 3D REFORM

HELP POINTER PIC-MUTE

VOLUME MAGNIFY SLIDE

ZOOM FOCUS FOLDER

SLIDE

LIST

Lit red

	ASPECT FREEZE 3D REFORM
Works as the ENTER	HELP	POINTER PIC-MUTE
	VOLUME MAGNIFY SLIDE
button on the projector.
	ZOOM	FOCUS FOLDER
		SLIDE
		LIST

•When the MENU button is pressed, the PJ button lights red to indicate that you are in the Projector mode, which allows the projector menu operation using the three buttons.

•When the POINTER button is pressed, the PJ button lights red to indicate that you are in the Projector mode and that the SELECT button works as a moving button for the POINTER or magnified image.

•If no buttons are pressed within 60 seconds, the PJ button's light goes out to indicate that you are in the Computer mode. To enable the projector menu operation again, press the PJ button to light red. To move the pointer or a magnified image again, turn off the pointer and then turn on the pointer (press the POINTER button two times).

•When the PJ button is lit, if you want to use the mouse function immediately, press the PJ button to return to the Computer mode (not lit).

During Computer mode:

In Computer mode, by pressing the ENTER button for 2 seconds or more then releasing, the drag mode is set and the drag operation can be

performed simply by pressing the SELECT (mouse) button. To drop the item, press the ENTER (left click) button again or press the CANCEL (right click) button.

E-24