Making Connections

NOTE: When using with a notebook PC, be sure to connect between the projector and the notebook PC before turning on the power to the notebook PC. In most cases signal cannot be output from RGB output unless the notebook PC is turned on after connecting with the projector.

*If the screen goes blank while using your remote control, it may be the result of the computer's screen-saver or power management software.

*If you accidentally hit the POWER button on the remote control, wait 90 seconds and then press the POWER button again to resume.

When Viewing a DVI Digital Signal:

To project a DVI digital signal, be sure to connect the PC and the projector using a DVI-D signal cable (not supplied) before turning on your PC or projector. Turn on the projector first and select DVI (DIGITAL) from the source menu before turning on your PC.

Failure to do so may not activate the digital output of the graphics card resulting in no picture being displayed. Should this happen, restart your PC. Do not disconnect the DVI-D signal cable while the projector is running. If the signal cable has been disconnected and then re-connected, an image may not be correctly displayed. Should this happen, restart your PC.

NOTE:

Use the DVI-D cable compliant with DDWG (Digital Display Working Group) DVI (Digital Visual Interface) revision 1.0 standard. The DVI-D cable should be within 5 m (196") long.

The DVI (DIGITAL) connector accepts VGA (640x480), SVGA (800x600), 1152x864, XGA (1024x768) and SXGA (1280x1024 @ up to 60Hz).

Connecting Your PC or Macintosh Computer

DVI IN

RGB 2 IN

RGB 1IN

RGB signal cable (supplied) To mini D-Sub 15-pin connec-

tor on the projector. It is recom- mended that you use a com- mercially available distribution amplifier if connecting a signal cable longer than the supplied one.

DVI-D cable (not supplied)

Audio cable (not supplied)

IBM PC or Compatibles (Desktop type) or Macintosh (Desktop type)

PHONE

IBM VGA or Compatibles (Notebook type) or Macintosh (Notebook type)

Connecting your PC or Macintosh computer to your projector will en- able you to project your computer's screen image for an impressive pre- sentation.

To connect to a PC or Macintosh, simply:

1.Turn off the power to your projector and computer.

2.Use the supplied signal cable to connect your PC or Macintosh to the projector.

3.Turn on the projector and the computer.

4.If the projector goes blank after a period of inactivity, it may be caused by a screen saver installed on the computer you've connected to the projector.

PHONE

NOTE: For older Macintosh, use a commercially available pin adapter (not supplied) to connect to your Mac's video port.

Connecting to RGB 2 IN connectors

Use a BNC×5 cable to connect your PC and the RGB 2 IN connectors on your projector.

Connecting Your PC with a DVI Connector

Use a DVI-D signal cable (not supplied) to connect a DVI connector of your PC to the projector.

NOTE: The MT1065/MT1060 is not compatible with video decoded outputs of NEC ISS-6020 and ISS-6010.

E-14

Page 14
Image 14
NEC MT1065/MT1060 Making Connections, When Viewing a DVI Digital Signal, Connecting Your PC or Macintosh Computer

MT1065/MT1060 specifications

The NEC MT1065 and MT1060 are advanced portable projectors that exemplify high-quality performance for various professional settings. These models, part of NEC’s reputation for reliable display solutions, cater to a wide range of applications, from corporate presentations to educational environments. Both projectors share several key features and technologies that make them standout choices in the market.

One of the main characteristics of the MT1065 and MT1060 is their high brightness level. The MT1065 delivers an impressive 5,500 ANSI lumens, while the MT1060 offers a slightly lower luminous output at 4,500 ANSI lumens. This high brightness ensures that presentations remain clear and visible, even in well-lit rooms. The projectors feature a high contrast ratio that enhances image quality by producing deeper blacks and brilliant whites.

In terms of imaging technology, both models utilize DLP (Digital Light Processing) technology, which is renowned for its sharpness and color accuracy. DLP technology contributes to vibrant images with smooth transitions and little to no motion blur, making these projectors suitable for displaying video content, graphics, or text-heavy presentations.

Portability is another vital aspect of the NEC MT1065 and MT1060. Weighing just over 6.5 lbs each, these projectors are designed for ease of transport, making them ideal for business professionals who frequently move between different locations. Their compact size does not compromise their durability, as they are constructed with robust materials suitable for various environments.

Both models come equipped with multiple connectivity options, including HDMI, VGA, and USB ports. This versatility allows users to connect a wide range of devices, from laptops and tablets to USB thumb drives, providing flexibility in presentations. Furthermore, the projectors also support a variety of display resolutions, up to Full HD 1080p, ensuring compatibility with modern multimedia content.

User-friendliness is emphasized through features such as automatic keystone correction and an intuitive user interface, simplifying setup and operation. The projectors also incorporate energy-efficient technologies, reducing power consumption and contributing to lower operational costs.

In summary, the NEC MT1065 and MT1060 projectors are equipped with high brightness levels, advanced DLP imaging technology, and user-friendly features, making them excellent choices for professionals seeking reliable, high-performance portable projectors. With their solid build quality and versatility, they effectively meet the demands of dynamic presentation environments.